From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sam Ravnborg Subject: [PATCH v1 2/7] dt-binding: add bindings for Atmel LCDC mfd Date: Sun, 12 Aug 2018 20:46:24 +0200 Message-ID: <20180812184629.3808-2-sam@ravnborg.org> References: <20180812184152.GA22343@ravnborg.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180812184152.GA22343@ravnborg.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Boris Brezillon , Rob Herring , Mark Rutland , Lee Jones , Nicolas Ferre , Alexandre Belloni Cc: devicetree@vger.kernel.org, Boris Brezillon , dri-devel@lists.freedesktop.org, linux-pwm@vger.kernel.org, Sam Ravnborg , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org The LCDC IP used by some Atmel SOC's have a multifunction device that include two sub-devices: - pwm - display controller This binding describe the multi function device that act as root for the sub-devices The Atmel SOC's are at91sam9 etc. The compatible name is intentionally prefixed with -mfd to avoid clash with existing compatible entries. Signed-off-by: Sam Ravnborg Cc: Lee Jones Cc: Boris Brezillon --- .../devicetree/bindings/mfd/atmel-lcdc.txt | 75 ++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/atmel-lcdc.txt diff --git a/Documentation/devicetree/bindings/mfd/atmel-lcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-lcdc.txt new file mode 100644 index 000000000000..70e9b7bda6c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-lcdc.txt @@ -0,0 +1,75 @@ +Device-Tree bindings for Atmel's LCDC (LCD Controller) MFD driver + +Required properties: + - compatible: value should be one of the following: + "atmel,at91sam9261-lcdc-mfd" + "atmel,at91sam9263-lcdc-mfd" + "atmel,at91sam9g10-lcdc-mfd" + "atmel,at91sam9g45-lcdc-mfd" + "atmel,at91sam9g46-lcdc-mfd" + "atmel,at91sam9m10-lcdc-mfd" + "atmel,at91sam9m11-lcdc-mfd" + "atmel,at91sam9rl-lcdc-mfd" + - reg: base address and size of the LCDC device registers. + - clock-names: the name of the 2 clocks requested by the LCDC device. + Should contain "lcdc_clk", and "hclk". + - clocks: should contain the 2 clocks requested by the LCDC device. + May specify the same clock twice is there is no need to enable + "hclk" to use the display. + - interrupts: should contain the description of the LCDC interrupt line + +The LCDC IP exposes two subdevices: + - a PWM chip: see ../pwm/atmel-lcdc-pwm.txt + - a Display Controller: see ../display/atmel/lcdc-display-controller.txt + +Example: + lcdc0: lcdc@700000 { + compatible = "atmel,at91sam9263-lcdc-mfd"; + reg = <0x700000 0x1000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "lcdc_clk", "hclk"; + + lcdc-display-controller { + compatible = "atmel,lcdc-display-controller"; + lcd-supply = <&lcdc_reg>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + lcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + lcdc_pwm: lcdc-pwm { + compatible = "atmel,lcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdc_pwm>; + #pwm-cells = <3>; + }; + + }; + + panel: panel { + compatible = "logictechnologies,lttd800480070-l2rt", "simple-panel"; + backlight = <&backlight>; + power-supply = <&panel_reg>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdc_panel_output>; + }; + }; + }; -- 2.12.0