From: Heiko Stuebner <heiko@sntech.de>
To: dri-devel@lists.freedesktop.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
briannorris@chromium.org, hoegsberg@gmail.com,
philippe.cornu@st.com, yannick.fertre@st.com,
linux-rockchip@lists.infradead.org, nickey.yang@rock-chips.com,
robh+dt@kernel.org, thierry.reding@gmail.com,
laurent.pinchart@ideasonboard.com, seanpaul@chromium.org,
mka@chromium.org
Subject: [PATCH v5 0/8] drm/rockchip: migrate to common dw-mipi-dsi bridge and dual-dsi
Date: Tue, 21 Aug 2018 16:05:08 +0200 [thread overview]
Message-ID: <20180821140515.22246-1-heiko@sntech.de> (raw)
The Rockchip DSI driver was separate till now, not using the common
bridge driver that was introduced a bit later. So this series migrates
over to use that common bridge driver and then also adds support for
dual-dsi to both the bridge and Rockchip glue code.
The bridge-migration itself is based on Nickeys earlier v8
work, but adapted to current kernels and with a new split between probe
and bind, so that we do not create and drop the dsi-host on each deferred
bind attempt.
changes in v2:
- rebase against newer drm code (dsi-bridge+rockchip changes)
- add SPDX header to new glue driver
- expect regular interface lanes from panel (like 4) not the double number
Similar to tegra
- keep links to both master and slave
changes in v3:
- don't defer in bridge_attach, instead add ability to check for finalized
panel attachement, for example in bind
- address bridge-conversion comments from Andrzej:
- include ordering
- moved hwaccess from mode_set to enable callback
- move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps)
- limited slave settings to dw_mipi_dsi_set_slave
- address dual-dsi comments from Philippe:
- remove unneeded separate variables
- remove unneeded second slave settings
- disable slave before master
- lane-sum calculation comments
changes in v4:
- rebase against some legacy rockchip-dsi changes
- add dsi-component only after panel has attached to dsi host
This solves quite some concurrency problems that happen when trying
to determine dsi-panel availability
changes in v5:
- use driver-internal method to find second host
- drop of-graph based dsi method for it
Unchanged from review comments:
- kept dw_mipi_dsi_bind, as the dsi->bridge member is only part of the
bridge drivers struct, so not accessible from glue drivers
- kept dual-dsi handling that mimicks tegra
Heiko Stuebner (4):
drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to
__dw_mipi_dsi_remove
drm/bridge/synopsys: dsi: don't call __dw_mipi_dsi_probe from
dw_mipi_dsi_bind
drm/bridge/synopsys: dsi: add ability to have glue-specific attach and
detach
drm/rockchip: dsi: add dual mipi support
Nickey Yang (3):
dt-bindings: display: rockchip: update DSI controller
drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver
drm/bridge/synopsys: dsi: add dual-dsi support
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 23 +-
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 114 +-
drivers/gpu/drm/rockchip/Kconfig | 2 +-
drivers/gpu/drm/rockchip/Makefile | 2 +-
.../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1044 +++++++++++++
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1349 -----------------
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 +
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 4 +
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
include/drm/bridge/dw_mipi_dsi.h | 14 +-
12 files changed, 1182 insertions(+), 1379 deletions(-)
create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
--
2.17.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2018-08-21 14:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-21 14:05 Heiko Stuebner [this message]
2018-08-21 14:05 ` [PATCH v5 1/7] drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to __dw_mipi_dsi_remove Heiko Stuebner
2018-08-21 14:05 ` [PATCH v5 2/7] drm/bridge/synopsys: dsi: don't call __dw_mipi_dsi_probe from dw_mipi_dsi_bind Heiko Stuebner
2018-08-21 14:05 ` [PATCH v5 3/7] drm/bridge/synopsys: dsi: add ability to have glue-specific attach and detach Heiko Stuebner
[not found] ` <20180821140515.22246-1-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2018-08-21 14:05 ` [PATCH v5 4/7] dt-bindings: display: rockchip: update DSI controller Heiko Stuebner
2018-08-21 14:05 ` [PATCH v5 5/7] drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver Heiko Stuebner
2018-08-23 13:48 ` [PATCH v5 0/8] drm/rockchip: migrate to common dw-mipi-dsi bridge and dual-dsi Philippe CORNU
2018-08-21 14:05 ` [PATCH v5 6/7] drm/bridge/synopsys: dsi: add dual-dsi support Heiko Stuebner
2018-08-27 10:55 ` Andrzej Hajda
2018-08-21 14:05 ` [PATCH v5 7/7] drm/rockchip: dsi: add dual mipi support Heiko Stuebner
2018-08-27 11:34 ` Andrzej Hajda
2018-09-20 11:20 ` Heiko Stuebner
2018-09-21 6:11 ` Andrzej Hajda
2018-10-01 12:44 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180821140515.22246-1-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=briannorris@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hoegsberg@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mka@chromium.org \
--cc=nickey.yang@rock-chips.com \
--cc=philippe.cornu@st.com \
--cc=robh+dt@kernel.org \
--cc=seanpaul@chromium.org \
--cc=thierry.reding@gmail.com \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).