devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>, Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Haim Boot <hayim@marvell.com>,
	Antoine Tenart <antoine.tenart@bootlin.com>,
	Hanna Hawa <hannah@marvell.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 06/14] irqchip/irq-mvebu-icu: support ICU subnodes
Date: Thu, 30 Aug 2018 09:35:27 +0200	[thread overview]
Message-ID: <20180830073535.10710-7-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180830073535.10710-1-miquel.raynal@bootlin.com>

The ICU can handle several type of interrupt, each of them being handled
differently on AP side. On CP side, the ICU should be able to make the
distinction between each interrupt group by pointing to the right parent.

This is done through the introduction of new bindings, presenting the ICU
node as the parent of multiple ICU sub-nodes, each of them being an
interrupt type with a different interrupt parent. ICU interrupt 'clients'
now directly point to the right sub-node, avoiding the need for the extra
ICU_GRP_* parameter.

ICU subnodes are probed automatically with devm_platform_populate(). If
the node as no child, the probe function for NSRs will still be called
'manually' in order to preserve backward compatibility with DT using the
old binding.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/irqchip/irq-mvebu-icu.c | 77 ++++++++++++++++++++++++++-------
 1 file changed, 61 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
index d09f220a2701..c79d2cb787a0 100644
--- a/drivers/irqchip/irq-mvebu-icu.c
+++ b/drivers/irqchip/irq-mvebu-icu.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
+#include <linux/jump_label.h>
 #include <linux/kernel.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
@@ -49,6 +50,8 @@ struct mvebu_icu_irq_data {
 	unsigned int type;
 };
 
+DEFINE_STATIC_KEY_FALSE(legacy_bindings);
+
 static void mvebu_icu_init(struct mvebu_icu *icu, struct msi_msg *msg)
 {
 	if (atomic_cmpxchg(&icu->initialized, false, true))
@@ -105,32 +108,33 @@ mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
 			       unsigned long *hwirq, unsigned int *type)
 {
 	struct mvebu_icu *icu = platform_msi_get_host_data(d);
-	unsigned int icu_group;
+	unsigned int param_count = static_branch_unlikely(&legacy_bindings) ? 3 : 2;
 
 	/* Check the count of the parameters in dt */
-	if (WARN_ON(fwspec->param_count < 3)) {
+	if (WARN_ON(fwspec->param_count != param_count)) {
 		dev_err(icu->dev, "wrong ICU parameter count %d\n",
 			fwspec->param_count);
 		return -EINVAL;
 	}
 
-	/* Only ICU group type is handled */
-	icu_group = fwspec->param[0];
-	if (icu_group != ICU_GRP_NSR && icu_group != ICU_GRP_SR &&
-	    icu_group != ICU_GRP_SEI && icu_group != ICU_GRP_REI) {
-		dev_err(icu->dev, "wrong ICU group type %x\n", icu_group);
-		return -EINVAL;
+	if (static_branch_unlikely(&legacy_bindings)) {
+		*hwirq = fwspec->param[1];
+		*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
+		if (fwspec->param[0] != ICU_GRP_NSR) {
+			dev_err(icu->dev, "wrong ICU group type %x\n",
+				fwspec->param[0]);
+			return -EINVAL;
+		}
+	} else {
+		*hwirq = fwspec->param[0];
+		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
 	}
 
-	*hwirq = fwspec->param[1];
 	if (*hwirq >= ICU_MAX_IRQS) {
 		dev_err(icu->dev, "invalid interrupt number %ld\n", *hwirq);
 		return -EINVAL;
 	}
 
-	/* Mask the type to prevent wrong DT configuration */
-	*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
-
 	return 0;
 }
 
@@ -155,7 +159,10 @@ mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 		goto free_irqd;
 	}
 
-	icu_irqd->icu_group = fwspec->param[0];
+	if (static_branch_unlikely(&legacy_bindings))
+		icu_irqd->icu_group = fwspec->param[0];
+	else
+		icu_irqd->icu_group = ICU_GRP_NSR;
 	icu_irqd->icu = icu;
 
 	err = platform_msi_domain_alloc(domain, virq, nr_irqs);
@@ -203,6 +210,13 @@ static const struct irq_domain_ops mvebu_icu_domain_ops = {
 	.free      = mvebu_icu_irq_domain_free,
 };
 
+static const struct of_device_id mvebu_icu_subset_of_match[] = {
+	{
+		.compatible = "marvell,cp110-icu-nsr",
+	},
+	{},
+};
+
 static int mvebu_icu_subset_probe(struct platform_device *pdev)
 {
 	struct device_node *msi_parent_dn;
@@ -210,7 +224,14 @@ static int mvebu_icu_subset_probe(struct platform_device *pdev)
 	struct irq_domain *irq_domain;
 	struct mvebu_icu *icu;
 
-	icu = dev_get_drvdata(dev);
+	/*
+	 * Device data being populated means we are using the legacy bindings.
+	 * Using the parent device data means we are using the new bindings.
+	 */
+	if (dev_get_drvdata(dev))
+		icu = dev_get_drvdata(dev);
+	else
+		icu = dev_get_drvdata(dev->parent);
 
 	dev->msi_domain = of_msi_get_domain(dev, dev->of_node,
 					    DOMAIN_BUS_PLATFORM_MSI);
@@ -233,6 +254,15 @@ static int mvebu_icu_subset_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static struct platform_driver mvebu_icu_subset_driver = {
+	.probe  = mvebu_icu_subset_probe,
+	.driver = {
+		.name = "mvebu-icu-subset",
+		.of_match_table = mvebu_icu_subset_of_match,
+	},
+};
+builtin_platform_driver(mvebu_icu_subset_driver);
+
 static int mvebu_icu_probe(struct platform_device *pdev)
 {
 	struct mvebu_icu *icu;
@@ -259,6 +289,16 @@ static int mvebu_icu_probe(struct platform_device *pdev)
 	if (!icu->irq_chip.name)
 		return -ENOMEM;
 
+	/*
+	 * Legacy bindings: ICU is one node with one MSI parent: force manually
+	 *                  the probe of the NSR interrupts side.
+	 * New bindings: ICU node has children, one per interrupt controller
+	 *               having its own MSI parent: call platform_populate().
+	 * All ICU instances should use the same bindings.
+	 */
+	if (!of_get_child_count(pdev->dev.of_node))
+		static_branch_enable(&legacy_bindings);
+
 	icu->irq_chip.irq_mask = irq_chip_mask_parent;
 	icu->irq_chip.irq_unmask = irq_chip_unmask_parent;
 	icu->irq_chip.irq_eoi = irq_chip_eoi_parent;
@@ -277,13 +317,18 @@ static int mvebu_icu_probe(struct platform_device *pdev)
 		icu_int = readl_relaxed(icu->base + ICU_INT_CFG(i));
 		icu_grp = icu_int >> ICU_GROUP_SHIFT;
 
-		if (icu_grp == ICU_GRP_NSR)
+		if (icu_grp == ICU_GRP_NSR ||
+		    (icu_grp == ICU_GRP_SEI &&
+		     !static_branch_unlikely(&legacy_bindings)))
 			writel_relaxed(0x0, icu->base + ICU_INT_CFG(i));
 	}
 
 	platform_set_drvdata(pdev, icu);
 
-	return mvebu_icu_subset_probe(pdev);
+	if (static_branch_unlikely(&legacy_bindings))
+		return mvebu_icu_subset_probe(pdev);
+	else
+		return devm_of_platform_populate(&pdev->dev);
 }
 
 static const struct of_device_id mvebu_icu_of_match[] = {
-- 
2.17.1

  parent reply	other threads:[~2018-08-30  7:35 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-30  7:35 [PATCH v5 00/14] Add System Error Interrupt support to Armada SoCs Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 01/14] genirq/msi: Allow creation of a tree-based irqdomain for platform-msi Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 02/14] dt-bindings/interrupt-controller: fix Marvell ICU length in the example Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 03/14] irqchip/irq-mvebu-icu: fix wrong private data retrieval Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 04/14] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 05/14] irqchip/irq-mvebu-icu: disociate ICU and NSR Miquel Raynal
2018-08-30  7:35 ` Miquel Raynal [this message]
2018-08-30  7:35 ` [PATCH v5 07/14] irqchip/irq-mvebu-sei: add new driver for Marvell SEI Miquel Raynal
2018-09-20 20:40   ` Marc Zyngier
2018-09-24 16:01     ` Miquel Raynal
2018-09-28 10:25       ` Marc Zyngier
2018-09-28 16:38         ` Miquel Raynal
2018-09-30 14:39           ` Marc Zyngier
2018-10-01 13:49             ` Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 08/14] arm64: marvell: enable SEI driver Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 09/14] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI) Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 10/14] dt-bindings/interrupt-controller: update Marvell ICU bindings Miquel Raynal
2018-09-10 18:12   ` Rob Herring
2018-08-30  7:35 ` [PATCH v5 11/14] dt-bindings/interrupt-controller: add documentation for Marvell SEI controller Miquel Raynal
2018-09-10 18:13   ` Rob Herring
2018-08-30  7:35 ` [PATCH v5 12/14] arm64: dts: marvell: add AP806 SEI subnode Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 13/14] arm64: dts: marvell: use new bindings for CP110 interrupts Miquel Raynal
2018-08-30  7:35 ` [PATCH v5 14/14] arm64: dts: marvell: add CP110 ICU SEI subnode Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180830073535.10710-7-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=antoine.tenart@bootlin.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=hannah@marvell.com \
    --cc=hayim@marvell.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=nadavh@marvell.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).