From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: [RESEND PATCH 3/4] arm64: dts: marvell: add macro to make distinction between node names Date: Thu, 30 Aug 2018 10:15:00 +0200 Message-ID: <20180830081501.11569-3-miquel.raynal@bootlin.com> References: <20180830081501.11569-1-miquel.raynal@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180830081501.11569-1-miquel.raynal@bootlin.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Gregory Clement , Jason Cooper , Andrew Lunn , Sebastian Hesselbarth Cc: devicetree@vger.kernel.org, Antoine Tenart , Maxime Chevallier , Nadav Haklai , Rob Herring , Thomas Petazzoni , Miquel Raynal , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Because the label is different between CPs, the full path of a node is unique. However, when referring to the end of the path only (the node name), this name is not unique anymore. The *thermal_zone_of_sensor_register() functions of the thermal core present this limitation and prevent having a thermal-zone per CP. Add a macro to make the distinction between node names to solve this situation. Signed-off-by: Miquel Raynal --- arch/arm64/boot/dts/marvell/armada-common.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index d5e8aedec188..b29c6405d214 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -7,4 +7,5 @@ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) #define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) +#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) -- 2.17.1