From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: [PATCH v5 1/7] i2c: designware: use generic table matching Date: Fri, 31 Aug 2018 17:11:08 +0200 Message-ID: <20180831151114.25739-2-alexandre.belloni@bootlin.com> References: <20180831151114.25739-1-alexandre.belloni@bootlin.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20180831151114.25739-1-alexandre.belloni@bootlin.com> Sender: linux-kernel-owner@vger.kernel.org To: Wolfram Sang , Jarkko Nikula , James Hogan , Paul Burton Cc: Andy Shevchenko , Mika Westerberg , linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, Thomas Petazzoni , Allan Nielsen , Alexandre Belloni List-Id: devicetree@vger.kernel.org Switch to device_get_match_data in probe to match the device specific data instead of using the acpi specific function. Suggested-by: Andy Shevchenko Acked-by: Andy Shevchenko Tested-by: Jarkko Nikula Acked-by: Jarkko Nikula Signed-off-by: Alexandre Belloni --- drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 1a8d2da5b000..72f403e75fa6 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -86,7 +86,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) struct i2c_timings *t = &dev->timings; u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0; acpi_handle handle = ACPI_HANDLE(&pdev->dev); - const struct acpi_device_id *id; struct acpi_device *adev; const char *uid; @@ -119,10 +118,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) break; } - id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); - if (id && id->driver_data) - dev->flags |= (u32)id->driver_data; - if (acpi_bus_get_device(handle, &adev)) return -ENODEV; @@ -291,6 +286,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) else t->bus_freq_hz = 400000; + dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev); + if (has_acpi_companion(&pdev->dev)) dw_i2c_acpi_configure(pdev); -- 2.19.0.rc1