Re: [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node

[Shawn Guo <shawnguo@kernel.org>]

On Wed, Aug 29, 2018 at 11:30:55AM +0800, Yinbo Zhu wrote:
> From: Rajesh Bhagat <rajesh.bhagat@freescale.com>
> 
> Add "configure-gfladj" boolean property to USB3 node. This property

I do not see where this property is documented as bindings and how
driver is using it.

Shawn

> is used to determine whether frame length adjustment is required or
> not
> 
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> ---
> Change in v2:
> 		Modified some word misspellings in commit information
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> index 7881e3d..ed3fa79 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> @@ -609,6 +609,7 @@
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
>  			snps,dis_rxdet_inp3_quirk;
> +			configure-gfladj;
>  		};
>  
>  		usb1: usb3@3000000 {
> @@ -618,6 +619,7 @@
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
>  			snps,dis_rxdet_inp3_quirk;
> +			configure-gfladj;
>  		};
>  
>  		usb2: usb3@3100000 {
> @@ -627,6 +629,7 @@
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
>  			snps,dis_rxdet_inp3_quirk;
> +			configure-gfladj;
>  		};
>  
>  		sata: sata@3200000 {
> -- 
> 1.7.1
>