* [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
@ 2018-08-29 3:30 Yinbo Zhu
2018-09-03 1:05 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Yinbo Zhu @ 2018-08-29 3:30 UTC (permalink / raw)
To: yinbo.zhu, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Ran Wang, linux-kernel
Cc: xiaobo.xie, Shawn Guo, Minghuan Lian, Yuantian Tang, Hou Zhiqiang,
Changming Huang, Sumit Garg, Fabio Estevam, Li Yang, devicetree,
linux-arm-kernel, Rajesh Bhagat
From: Rajesh Bhagat <rajesh.bhagat@freescale.com>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustment is required or
not
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
Change in v2:
Modified some word misspellings in commit information
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d..ed3fa79 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -609,6 +609,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};
usb1: usb3@3000000 {
@@ -618,6 +619,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};
usb2: usb3@3100000 {
@@ -627,6 +629,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};
sata: sata@3200000 {
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
2018-08-29 3:30 [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node Yinbo Zhu
@ 2018-09-03 1:05 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2018-09-03 1:05 UTC (permalink / raw)
To: Yinbo Zhu
Cc: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Ran Wang,
linux-kernel, xiaobo.xie, Minghuan Lian, Yuantian Tang,
Hou Zhiqiang, Changming Huang, Sumit Garg, Fabio Estevam, Li Yang,
devicetree, linux-arm-kernel, Rajesh Bhagat
On Wed, Aug 29, 2018 at 11:30:55AM +0800, Yinbo Zhu wrote:
> From: Rajesh Bhagat <rajesh.bhagat@freescale.com>
>
> Add "configure-gfladj" boolean property to USB3 node. This property
I do not see where this property is documented as bindings and how
driver is using it.
Shawn
> is used to determine whether frame length adjustment is required or
> not
>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> ---
> Change in v2:
> Modified some word misspellings in commit information
>
> arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> index 7881e3d..ed3fa79 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> @@ -609,6 +609,7 @@
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> + configure-gfladj;
> };
>
> usb1: usb3@3000000 {
> @@ -618,6 +619,7 @@
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> + configure-gfladj;
> };
>
> usb2: usb3@3100000 {
> @@ -627,6 +629,7 @@
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> + configure-gfladj;
> };
>
> sata: sata@3200000 {
> --
> 1.7.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-09-03 1:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-08-29 3:30 [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node Yinbo Zhu
2018-09-03 1:05 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).