From: Lina Iyer <ilina@codeaurora.org>
To: marc.zyngier@arm.com, bjorn.andersson@linaro.org,
sboyd@kernel.org, evgreen@chromium.org, linus.walleij@linaro.org
Cc: rplsssn@codeaurora.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, rnayak@codeaurora.org,
devicetree@vger.kernel.org, andy.gross@linaro.org,
dianders@chromium.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH v3 5/5] arm64: dts: qcom: add wake up interrupts for GPIOs for SDM845
Date: Tue, 4 Sep 2018 15:18:10 -0600 [thread overview]
Message-ID: <20180904211810.5506-6-ilina@codeaurora.org> (raw)
In-Reply-To: <20180904211810.5506-1-ilina@codeaurora.org>
GPIOs that are wakeup capable have interrupt lines that are routed to
the always-on interrupt controller (PDC) in parallel to the pinctrl. The
interrupts listed here are the wake up lines corresponding to GPIOs.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v2:
- Define IRQ trigger type in DT
Changes in v1:
- Use interrupt-extended for all TLMM interrupts
- Define GPIO-PDC map using interrupt-names
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 152 ++++++++++++++++++++++++++-
1 file changed, 151 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0208f8557ffa..8d87794092b0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -712,11 +712,161 @@
tlmm: pinctrl@3400000 {
compatible = "qcom,sdm845-pinctrl";
reg = <0x03400000 0xc00000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ interrupts-extended =
+ <&intc GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 30 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 31 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 32 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 33 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 34 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 35 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 36 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 37 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 38 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 39 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 41 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 42 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 43 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 44 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 45 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 46 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 47 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 49 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 50 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 52 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 54 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 55 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 56 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 57 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 58 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 59 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 60 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 61 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 62 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 63 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 64 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 65 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 66 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 68 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 70 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 71 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 73 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 75 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 77 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 79 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 80 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 81 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 82 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 83 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 90 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 91 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 92 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 95 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 96 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 97 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 98 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 99 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 100 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 102 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 103 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 104 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 105 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 106 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 107 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "summary-irq",
+ "gpio1",
+ "gpio3",
+ "gpio5",
+ "gpio10",
+ "gpio11",
+ "gpio20",
+ "gpio22",
+ "gpio24",
+ "gpio26",
+ "gpio30",
+ "gpio32",
+ "gpio34",
+ "gpio36",
+ "gpio37",
+ "gpio38",
+ "gpio39",
+ "gpio40",
+ "gpio43",
+ "gpio44",
+ "gpio46",
+ "gpio48",
+ "gpio52",
+ "gpio53",
+ "gpio54",
+ "gpio56",
+ "gpio57",
+ "gpio58",
+ "gpio59",
+ "gpio60",
+ "gpio61",
+ "gpio62",
+ "gpio63",
+ "gpio64",
+ "gpio66",
+ "gpio68",
+ "gpio71",
+ "gpio73",
+ "gpio77",
+ "gpio78",
+ "gpio79",
+ "gpio80",
+ "gpio84",
+ "gpio85",
+ "gpio86",
+ "gpio88",
+ "gpio91",
+ "gpio92",
+ "gpio95",
+ "gpio96",
+ "gpio97",
+ "gpio101",
+ "gpio103",
+ "gpio104",
+ "gpio115",
+ "gpio116",
+ "gpio117",
+ "gpio118",
+ "gpio119",
+ "gpio120",
+ "gpio121",
+ "gpio122",
+ "gpio123",
+ "gpio124",
+ "gpio125",
+ "gpio127",
+ "gpio128",
+ "gpio129",
+ "gpio130",
+ "gpio132",
+ "gpio133",
+ "gpio145",
+ "gpio41",
+ "gpio89",
+ "gpio31",
+ "gpio49",
+ "gpio41",
+ "gpio89",
+ "gpio31",
+ "gpio49";
qup_i2c0_default: qup-i2c0-default {
pinmux {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
prev parent reply other threads:[~2018-09-04 21:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 21:18 [PATCH v3 0/5] Wakeup GPIO support for SDM845 Lina Iyer
2018-09-04 21:18 ` [PATCH v3 1/5] drivers: pinctrl: qcom: add wakeup capability to GPIO Lina Iyer
2018-09-05 17:34 ` Lina Iyer
2018-09-20 23:11 ` Marc Zyngier
2018-09-21 16:08 ` Lina Iyer
2018-10-02 17:06 ` Lina Iyer
2018-10-09 17:07 ` Lina Iyer
2018-10-10 8:58 ` Marc Zyngier
2018-09-04 21:18 ` [PATCH v3 2/5] dt-bindings: pinctrl: add wakeup capable GPIOs for SDM845 Lina Iyer
2018-09-10 16:28 ` Rob Herring
2018-09-10 16:58 ` Lina Iyer
2018-09-04 21:18 ` [PATCH v3 3/5] drivers: pinctrl: msm: enable PDC interrupt only during suspend Lina Iyer
2018-09-22 16:29 ` Marc Zyngier
2018-09-22 17:09 ` Lina Iyer
2018-09-23 9:47 ` Marc Zyngier
2018-09-24 15:35 ` Lina Iyer
2018-09-04 21:18 ` [PATCH v3 4/5] drivers: pinctrl: qcom: sdm845: support GPIO wakeup from suspend Lina Iyer
2018-09-04 21:18 ` Lina Iyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180904211810.5506-6-ilina@codeaurora.org \
--to=ilina@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=rnayak@codeaurora.org \
--cc=rplsssn@codeaurora.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).