From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Gonzalez, Alex" Subject: Re: [PATCH v2] ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro Date: Wed, 5 Sep 2018 10:25:37 +0000 Message-ID: <20180905102536.GC15467@agonzal-linux> References: <1536074909-8654-1-git-send-email-alex.gonzalez@digi.com> <1536074909-8654-2-git-send-email-alex.gonzalez@digi.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: Content-Language: en-US Content-ID: <47934663C063D24DA764197D041FF55A@digi.com> Sender: linux-kernel-owner@vger.kernel.org To: Fabio Estevam Cc: Shawn Guo , Rob Herring , Mark Rutland , Sascha Hauer , Sascha Hauer , Fabio Estevam , NXP Linux Team , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , linux-kernel , "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" List-Id: devicetree@vger.kernel.org Hi Fabio, thanks for the review. >Missing a panel attached to the lcdif? > My intention was to add the board support first, and then one or more panels as independent patches. Doesn't that make more sense that adding a default panel with the board support? Thanks, Alex