* [PATCH v3 1/8] arm64: dts: Add msm8998 SoC and MTP board support
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 2/8] arm64: dts: qcom: msm8998: Add RPM and regulators for MTP Bjorn Andersson
` (6 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
From: Joonwoo Park <joonwoop@codeaurora.org>
Add initial device tree support for the Qualcomm MSM8998 SoC and
MTP8998 evaluation board.
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Imran Khan <kimran@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[bjorn: Restructured, removed its node and moved to SPDX headers]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- Updated structure of dts to match our discussions
- Sorted nodes
- s/MSM 8998/MSM8998/
- Dropped model from platform dtsi
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/msm8998-mtp.dts | 13 +
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 18 ++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 346 ++++++++++++++++++++++
4 files changed, 378 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-mtp.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8998.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9319e74b8906..a658c07652a7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,4 +6,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
new file mode 100644
index 000000000000..66540d2ca13b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-mtp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
+ compatible = "qcom,msm8998-mtp";
+
+ qcom,board-id = <8 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
new file mode 100644
index 000000000000..9202824fcb56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include "msm8998.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
new file mode 100644
index 000000000000..e52a68421480
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ qcom,msm-id = <292 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ clocks {
+ xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_0: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_0: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_1: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_1: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_2: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_2: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_3: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_3: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_100: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_100: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_101: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_101: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_102: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_102: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_103: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_103: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-msm8998";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x100000 0xb0000>;
+ };
+
+ tlmm: pinctrl@3400000 {
+ compatible = "qcom,msm8998-pinctrl";
+ reg = <0x3400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ spmi_bus: spmi@800f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x800f000 0x1000>,
+ <0x8400000 0x1000000>,
+ <0x9400000 0x1000000>,
+ <0xa400000 0x220000>,
+ <0x800a000 0x3000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ blsp2_uart1: serial@c1b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xc1b0000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ timer@17920000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17920000 0x1000>;
+
+ frame@17921000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17921000 0x1000>,
+ <0x17922000 0x1000>;
+ };
+
+ frame@17923000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17923000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17924000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17924000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17925000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17925000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17926000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17926000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17927000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17927000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17928000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17928000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x17a00000 0x10000>, /* GICD */
+ <0x17b00000 0x100000>; /* GICR * 8 */
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 2/8] arm64: dts: qcom: msm8998: Add RPM and regulators for MTP
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 1/8] arm64: dts: Add msm8998 SoC and MTP board support Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones Bjorn Andersson
` (5 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
Add nodes for RPM communication for MSM8998 and the regulator nodes for
the MTP.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- Moved regulators to MTP, as the choice of PMICs can be device specifc
- Updated names of regulators
- Corrected the supply tree of the regulators
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 184 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 27 ++++
2 files changed, 211 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 9202824fcb56..09b46c54e413 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -11,8 +11,192 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&blsp2_uart1 {
status = "okay";
};
+
+&rpm_requests {
+ pm8998-regulators {
+ compatible = "qcom,rpm-pm8998-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_s13-supply = <&vph_pwr>;
+ vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+ vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+ vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+ vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+ vdd_l6-supply = <&vreg_s5a_2p04>;
+ vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+ vdd_l9-supply = <&vreg_bob>;
+ vdd_l10_l23_l25-supply = <&vreg_bob>;
+ vdd_l13_l19_l21-supply = <&vreg_bob>;
+ vdd_l16_l28-supply = <&vreg_bob>;
+ vdd_l18_l22-supply = <&vreg_bob>;
+ vdd_l20_l24-supply = <&vreg_bob>;
+ vdd_l26-supply = <&vreg_s3a_1p35>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: s3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_s5a_2p04: s5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+ vreg_s7a_1p025: s7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+ vreg_l1a_0p875: l1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ };
+ vreg_l2a_1p2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <1808000>;
+ };
+ vreg_l7a_1p8: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l8a_1p2: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l11a_1p0: l11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l14a_1p88: l14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ };
+ vreg_15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l17a_1p3: l17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ };
+ vreg_l18a_2p7: l18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l19a_3p0: l19 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l22a_2p85: l22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <2864000>;
+ };
+ vreg_l23a_3p3: l23 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ };
+ vreg_l25a_3p3: l25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l26a_1p2: l26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l28_3p0: l28 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ };
+
+ pmi8998-regulators {
+ compatible = "qcom,rpm-pmi8998-regulators";
+
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index e52a68421480..98b9edb89424 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -210,6 +210,21 @@
method = "smc";
};
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8998";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
@@ -224,6 +239,11 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ rpm_msg_ram: memory@68000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x778000 0x7000>;
+ };
+
gcc: clock-controller@100000 {
compatible = "qcom,gcc-msm8998";
#clock-cells = <1>;
@@ -261,6 +281,13 @@
cell-index = <0>;
};
+ apcs_glb: mailbox@9820000 {
+ compatible = "qcom,msm8998-apcs-hmss-global";
+ reg = <0x17911000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
blsp2_uart1: serial@c1b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xc1b0000 0x1000>;
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 1/8] arm64: dts: Add msm8998 SoC and MTP board support Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 2/8] arm64: dts: qcom: msm8998: Add RPM and regulators for MTP Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
2018-09-06 13:53 ` Amit Kucheria
2018-09-04 5:01 ` [PATCH v3 4/8] arm64: dts: qcom: msm8998: Add pmi8998 file Bjorn Andersson
` (4 subsequent siblings)
7 siblings, 1 reply; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
Add the two tsens instances and the thermal zones for CPUs, GPUs,
battery and skin sensors.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 38 +++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 193 ++++++++++++++++++++++
2 files changed, 231 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 09b46c54e413..202aa1a5cf27 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -12,6 +12,44 @@
stdout-path = "serial0:115200n8";
};
+ thermal-zones {
+ battery-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ battery_crit: trip0 {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ skin-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ skin_alert: trip0 {
+ temperature = <44000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ skip_crit: trip1 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 98b9edb89424..f92f04f9ed6d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -225,6 +225,183 @@
};
};
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal4 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu_alert4: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit4: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal5 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu_alert5: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit5: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal6 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ cpu_alert6: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit6: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal7 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu_alert7: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit7: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
@@ -281,6 +458,22 @@
cell-index = <0>;
};
+ tsens0: thermal@10aa000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10aa000 0x2000>;
+
+ #qcom,sensors = <12>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal@10ad000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10ad000 0x2000>;
+
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
+ };
+
apcs_glb: mailbox@9820000 {
compatible = "qcom,msm8998-apcs-hmss-global";
reg = <0x17911000 0x1000>;
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones
2018-09-04 5:01 ` [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones Bjorn Andersson
@ 2018-09-06 13:53 ` Amit Kucheria
2018-09-06 15:46 ` Bjorn Andersson
0 siblings, 1 reply; 11+ messages in thread
From: Amit Kucheria @ 2018-09-06 13:53 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, David Brown, Rob Herring, Mark Rutland, linux-arm-msm,
open list:ARM/QUALCOMM SUPPORT,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML
On Tue, Sep 4, 2018 at 10:31 AM, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
> Add the two tsens instances and the thermal zones for CPUs, GPUs,
> battery and skin sensors.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v2:
> - New patch
>
> arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 38 +++++
> arch/arm64/boot/dts/qcom/msm8998.dtsi | 193 ++++++++++++++++++++++
> 2 files changed, 231 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
> index 09b46c54e413..202aa1a5cf27 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
> @@ -12,6 +12,44 @@
> stdout-path = "serial0:115200n8";
> };
>
> + thermal-zones {
> + battery-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 0>;
> +
> + trips {
> + battery_crit: trip0 {
> + temperature = <60000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + skin-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens1 5>;
> +
> + trips {
> + skin_alert: trip0 {
> + temperature = <44000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + skip_crit: trip1 {
> + temperature = <70000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +
> vph_pwr: vph-pwr-regulator {
> compatible = "regulator-fixed";
> regulator-name = "vph_pwr";
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index 98b9edb89424..f92f04f9ed6d 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -225,6 +225,183 @@
> };
> };
>
> + thermal-zones {
> + cpu-thermal0 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 6>;
> +
> + trips {
> + cpu_alert0: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit0: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-thermal1 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 7>;
> +
> + trips {
> + cpu_alert1: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit1: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-thermal2 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 8>;
> +
> + trips {
> + cpu_alert2: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit2: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-thermal3 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 9>;
> +
> + trips {
> + cpu_alert3: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit3: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-thermal4 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 10>;
> +
> + trips {
> + cpu_alert4: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit4: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-thermal5 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 11>;
> +
> + trips {
> + cpu_alert5: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit5: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-thermal6 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens1 0>;
> +
> + trips {
> + cpu_alert6: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit6: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-thermal7 {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens1 1>;
> +
> + trips {
> + cpu_alert7: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit7: trip1 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens1 3>;
> + };
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
> @@ -281,6 +458,22 @@
> cell-index = <0>;
> };
>
> + tsens0: thermal@10aa000 {
> + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
> + reg = <0x10aa000 0x2000>;
> +
use the SROT and TM split for v2?
> + #qcom,sensors = <12>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: thermal@10ad000 {
> + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
> + reg = <0x10ad000 0x2000>;
> +
use the SROT and TM split for v2?
> + #qcom,sensors = <8>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> apcs_glb: mailbox@9820000 {
> compatible = "qcom,msm8998-apcs-hmss-global";
> reg = <0x17911000 0x1000>;
> --
> 2.18.0
>
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones
2018-09-06 13:53 ` Amit Kucheria
@ 2018-09-06 15:46 ` Bjorn Andersson
0 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-06 15:46 UTC (permalink / raw)
To: Amit Kucheria
Cc: Andy Gross, David Brown, Rob Herring, Mark Rutland, linux-arm-msm,
open list:ARM/QUALCOMM SUPPORT,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML
On Thu 06 Sep 06:53 PDT 2018, Amit Kucheria wrote:
> On Tue, Sep 4, 2018 at 10:31 AM, Bjorn Andersson
> > diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
[..]
> > + tsens0: thermal@10aa000 {
> > + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
> > + reg = <0x10aa000 0x2000>;
> > +
>
> use the SROT and TM split for v2?
>
You're right, lets use the new style from the beginning.
Thanks,
Bjorn
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 4/8] arm64: dts: qcom: msm8998: Add pmi8998 file
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
` (2 preceding siblings ...)
2018-09-04 5:01 ` [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 5/8] arm64: dts: qcom: msm8998: Add smem related nodes Bjorn Andersson
` (3 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
Add new dtsi file for the PMI8998, with its gpios and include all three
PMICs in the MSM8998 MTP dts.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 3 ++
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 40 +++++++++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pmi8998.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 202aa1a5cf27..b4276da1fb0d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -2,6 +2,9 @@
/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
#include "msm8998.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include "pm8005.dtsi"
/ {
aliases {
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
new file mode 100644
index 000000000000..da3285e216e2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmi8998_lsid0: pmic@2 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmi8998_gpio: gpios@c000 {
+ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>;
+ };
+ };
+
+ pmi8998_lsid1: pmic@3 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 5/8] arm64: dts: qcom: msm8998: Add smem related nodes
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
` (3 preceding siblings ...)
2018-09-04 5:01 ` [PATCH v3 4/8] arm64: dts: qcom: msm8998: Add pmi8998 file Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 6/8] arm64: dts: qcom: msm8998: Add firmware node Bjorn Andersson
` (2 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
Add reserve-memory nodes, tcsr-mutex nodes and the smem node.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/msm8998.dtsi | 49 +++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f92f04f9ed6d..335bbc339932 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -20,6 +20,38 @@
reg = <0 0 0 0>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
+ };
+
+ smem_mem: smem-mem@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
+ };
+
+ memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
+ };
+
+ rmtfs {
+ compatible = "qcom,rmtfs-mem";
+
+ size = <0x0 0x200000>;
+ alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+ };
+
clocks {
xo_board {
compatible = "fixed-clock";
@@ -205,6 +237,12 @@
};
};
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -225,6 +263,12 @@
};
};
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
@@ -474,6 +518,11 @@
#thermal-sensor-cells = <1>;
};
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0x1f40000 0x20000>;
+ };
+
apcs_glb: mailbox@9820000 {
compatible = "qcom,msm8998-apcs-hmss-global";
reg = <0x17911000 0x1000>;
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 6/8] arm64: dts: qcom: msm8998: Add firmware node
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
` (4 preceding siblings ...)
2018-09-04 5:01 ` [PATCH v3 5/8] arm64: dts: qcom: msm8998: Add smem related nodes Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 7/8] arm64: dts: qcom: msm8998: Add the qfprom node Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 8/8] arm64: dts: qcom: msm8998: Add smp2p nodes Bjorn Andersson
7 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
Add the firmware and scm nodes for msm8998
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 335bbc339932..7cf655f04489 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -237,6 +237,12 @@
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8998";
+ };
+ };
+
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 7/8] arm64: dts: qcom: msm8998: Add the qfprom node
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
` (5 preceding siblings ...)
2018-09-04 5:01 ` [PATCH v3 6/8] arm64: dts: qcom: msm8998: Add firmware node Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 8/8] arm64: dts: qcom: msm8998: Add smp2p nodes Bjorn Andersson
7 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
Add the QFPROM nvmem node to msm8998
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/msm8998.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 7cf655f04489..f0cdad91b6c9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -471,6 +471,13 @@
reg = <0x778000 0x7000>;
};
+ qfprom: qfprom@780000 {
+ compatible = "qcom,qfprom";
+ reg = <0x780000 0x621c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
gcc: clock-controller@100000 {
compatible = "qcom,gcc-msm8998";
#clock-cells = <1>;
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 8/8] arm64: dts: qcom: msm8998: Add smp2p nodes
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
` (6 preceding siblings ...)
2018-09-04 5:01 ` [PATCH v3 7/8] arm64: dts: qcom: msm8998: Add the qfprom node Bjorn Andersson
@ 2018-09-04 5:01 ` Bjorn Andersson
7 siblings, 0 replies; 11+ messages in thread
From: Bjorn Andersson @ 2018-09-04 5:01 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
Add the adsp, modem and slpi smp2p nodes to msm8998.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/msm8998.dtsi | 64 +++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f0cdad91b6c9..820c75c7b484 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -275,6 +275,70 @@
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 26>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread