From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Kaehlcke Subject: [PATCH v2 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg' Date: Thu, 6 Sep 2018 14:04:52 -0700 Message-ID: <20180906210454.247219-2-mka@chromium.org> References: <20180906210454.247219-1-mka@chromium.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20180906210454.247219-1-mka@chromium.org> Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross , David Brown , Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler Cc: linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, Douglas Anderson , Matthias Kaehlcke List-Id: devicetree@vger.kernel.org The documentation of Qualcomm's SPMI PMIC voltage ADC claims that the 'reg' property consists of two values, the SPMI address and the length of the controller's registers. However the SPMI bus to which it is added specifies "#size-cells = <0>;". Remove the controller register length from the documentation of the field and the example. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Reviewed-by: Rob Herring Signed-off-by: Matthias Kaehlcke -- Changes in v2: - none --- Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt index 0fb46137f936..d0c188e5c922 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt @@ -13,7 +13,7 @@ VADC node: - reg: Usage: required Value type: - Definition: VADC base address and length in the SPMI PMIC register map. + Definition: VADC base address in the SPMI PMIC register map. - #address-cells: Usage: required @@ -104,7 +104,7 @@ Example: /* VADC node */ pmic_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; -- 2.19.0.rc2.392.g5ba43deb5a-goog