From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH v2 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg' Date: Sat, 8 Sep 2018 15:11:42 +0100 Message-ID: <20180908151142.465a1b7b@archlinux> References: <20180906210454.247219-1-mka@chromium.org> <20180906210454.247219-2-mka@chromium.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180906210454.247219-2-mka@chromium.org> Sender: linux-kernel-owner@vger.kernel.org To: Matthias Kaehlcke Cc: Andy Gross , David Brown , Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, Douglas Anderson List-Id: devicetree@vger.kernel.org On Thu, 6 Sep 2018 14:04:52 -0700 Matthias Kaehlcke wrote: > The documentation of Qualcomm's SPMI PMIC voltage ADC claims that the > 'reg' property consists of two values, the SPMI address and the length > of the controller's registers. However the SPMI bus to which it is added > specifies "#size-cells = <0>;". Remove the controller register length > from the documentation of the field and the example. > > Signed-off-by: Matthias Kaehlcke > Reviewed-by: Douglas Anderson > Reviewed-by: Rob Herring > Signed-off-by: Matthias Kaehlcke Applied to the togreg branch of iio.git. Thanks, Jonathan > -- > Changes in v2: > - none > --- > Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt > index 0fb46137f936..d0c188e5c922 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt > @@ -13,7 +13,7 @@ VADC node: > - reg: > Usage: required > Value type: > - Definition: VADC base address and length in the SPMI PMIC register map. > + Definition: VADC base address in the SPMI PMIC register map. > > - #address-cells: > Usage: required > @@ -104,7 +104,7 @@ Example: > /* VADC node */ > pmic_vadc: vadc@3100 { > compatible = "qcom,spmi-vadc"; > - reg = <0x3100 0x100>; > + reg = <0x3100>; > interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > #address-cells = <1>; > #size-cells = <0>;