From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP Date: Wed, 12 Sep 2018 09:22:54 +0800 Message-ID: <20180912012252.GE28469@dragon> References: <20180910125056.30813-1-s.hauer@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20180910125056.30813-1-s.hauer@pengutronix.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Sascha Hauer Cc: Fabio Estevam , devicetree@vger.kernel.org, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, NXP Linux Team List-Id: devicetree@vger.kernel.org On Mon, Sep 10, 2018 at 02:50:56PM +0200, Sascha Hauer wrote: > The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the > 1.2GHz OPP. This makes the board work with cpufreq again. I feel that the word 'again' and the Fixes tag below are a little confusing. It makes impression that cpufreq worked fine on the board before and commit 791f416608 broke it. However, this is not the case, right? > > Fixes: 791f416608 ("ARM: dts: imx53: add cpufreq-dt support") Shawn > > Signed-off-by: Sascha Hauer > --- > arch/arm/boot/dts/imx53-qsb-common.dtsi | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi > index 7423d462d1e4..50dde84b72ed 100644 > --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi > +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi > @@ -123,6 +123,17 @@ > }; > }; > > +&cpu0 { > + /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ > + operating-points = < > + /* kHz uV */ > + 166666 850000 > + 400000 900000 > + 800000 1050000 > + 1000000 1200000 > + >; > +}; > + > &esdhc1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_esdhc1>; > -- > 2.18.0 >