Re: [PATCH 06/11] dts: arm: imx7{d,s}: Update coresight binding for hardware ports

[Shawn Guo <shawnguo@kernel.org>]

On Tue, Sep 11, 2018 at 11:17:07AM +0100, Suzuki K Poulose wrote:
> Switch to the updated coresight bindings.
> 
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

As per the convention we use for subject prefix, I suggest you use

  'ARM: dts: imx7: ...'

Shawn

> ---
>  arch/arm/boot/dts/imx7d.dtsi | 11 ++++---
>  arch/arm/boot/dts/imx7s.dtsi | 78 ++++++++++++++++++++++++++------------------
>  2 files changed, 53 insertions(+), 36 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 7cbc2ff..4ced17c 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -63,9 +63,11 @@
>  			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
>  			clock-names = "apb_pclk";
>  
> -			port {
> -				etm1_out_port: endpoint {
> -					remote-endpoint = <&ca_funnel_in_port1>;
> +			out-ports {
> +				port {
> +					etm1_out_port: endpoint {
> +						remote-endpoint = <&ca_funnel_in_port1>;
> +					};
>  				};
>  			};
>  		};
> @@ -148,11 +150,10 @@
>  	};
>  };
>  
> -&ca_funnel_ports {
> +&ca_funnel_in_ports {
>  	port@1 {
>  		reg = <1>;
>  		ca_funnel_in_port1: endpoint {
> -			slave-mode;
>  			remote-endpoint = <&etm1_out_port>;
>  		};
>  	};
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index a052198..9176885 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -106,7 +106,7 @@
>  		 */
>  		compatible = "arm,coresight-replicator";
>  
> -		ports {
> +		out-ports {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  				/* replicator output ports */
> @@ -123,12 +123,15 @@
>  					remote-endpoint = <&etr_in_port>;
>  				};
>  			};
> +		};
>  
> -			/* replicator input port */
> -			port@2 {
> +		in-ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
>  				reg = <0>;
>  				replicator_in_port0: endpoint {
> -					slave-mode;
>  					remote-endpoint = <&etf_out_port>;
>  				};
>  			};
> @@ -168,28 +171,31 @@
>  			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
>  			clock-names = "apb_pclk";
>  
> -			ca_funnel_ports: ports {
> +			ca_funnel_in_ports: in-ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  
> -				/* funnel input ports */
>  				port@0 {
>  					reg = <0>;
>  					ca_funnel_in_port0: endpoint {
> -						slave-mode;
>  						remote-endpoint = <&etm0_out_port>;
>  					};
>  				};
>  
> -				/* funnel output port */
> -				port@2 {
> +				/* the other input ports are not connect to anything */
> +			};
> +
> +			out-ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
>  					reg = <0>;
>  					ca_funnel_out_port0: endpoint {
>  						remote-endpoint = <&hugo_funnel_in_port0>;
>  					};
>  				};
>  
> -				/* the other input ports are not connect to anything */
>  			};
>  		};
>  
> @@ -200,9 +206,11 @@
>  			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
>  			clock-names = "apb_pclk";
>  
> -			port {
> -				etm0_out_port: endpoint {
> -					remote-endpoint = <&ca_funnel_in_port0>;
> +			out-ports {
> +				port {
> +					etm0_out_port: endpoint {
> +						remote-endpoint = <&ca_funnel_in_port0>;
> +					};
>  				};
>  			};
>  		};
> @@ -213,15 +221,13 @@
>  			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
>  			clock-names = "apb_pclk";
>  
> -			ports {
> +			in-ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  
> -				/* funnel input ports */
>  				port@0 {
>  					reg = <0>;
>  					hugo_funnel_in_port0: endpoint {
> -						slave-mode;
>  						remote-endpoint = <&ca_funnel_out_port0>;
>  					};
>  				};
> @@ -229,18 +235,22 @@
>  				port@1 {
>  					reg = <1>;
>  					hugo_funnel_in_port1: endpoint {
> -						slave-mode; /* M4 input */
> +						/* M4 input */
>  					};
>  				};
> +				/* the other input ports are not connect to anything */
> +			};
>  
> -				port@2 {
> +			out-ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
>  					reg = <0>;
>  					hugo_funnel_out_port0: endpoint {
>  						remote-endpoint = <&etf_in_port>;
>  					};
>  				};
> -
> -				/* the other input ports are not connect to anything */
>  			};
>  		};
>  
> @@ -250,19 +260,23 @@
>  			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
>  			clock-names = "apb_pclk";
>  
> -			ports {
> +			in-ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  
>  				port@0 {
>  					reg = <0>;
>  					etf_in_port: endpoint {
> -						slave-mode;
>  						remote-endpoint = <&hugo_funnel_out_port0>;
>  					};
>  				};
> +			};
>  
> -				port@1 {
> +			out-ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
>  					reg = <0>;
>  					etf_out_port: endpoint {
>  						remote-endpoint = <&replicator_in_port0>;
> @@ -277,10 +291,11 @@
>  			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
>  			clock-names = "apb_pclk";
>  
> -			port {
> -				etr_in_port: endpoint {
> -					slave-mode;
> -					remote-endpoint = <&replicator_out_port1>;
> +			in-ports {
> +				port {
> +					etr_in_port: endpoint {
> +						remote-endpoint = <&replicator_out_port1>;
> +					};
>  				};
>  			};
>  		};
> @@ -291,10 +306,11 @@
>  			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
>  			clock-names = "apb_pclk";
>  
> -			port {
> -				tpiu_in_port: endpoint {
> -					slave-mode;
> -					remote-endpoint = <&replicator_out_port0>;
> +			in-ports {
> +				port {
> +					tpiu_in_port: endpoint {
> +						remote-endpoint = <&replicator_out_port0>;
> +					};
>  				};
>  			};
>  		};
> -- 
> 2.7.4
>