From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH] arm64: dts: fsl: Fix I2C and SPI bus warnings
Date: Thu, 13 Sep 2018 13:12:43 -0500 [thread overview]
Message-ID: <20180913181245.25484-19-robh@kernel.org> (raw)
dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please apply to the sub-arch tree. The dtc changes haven't landed, but
will for 4.20.
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 68ac78c4564d..5da732f82fa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -337,7 +337,7 @@
status = "disabled";
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d81a9a..b9c0f2de8f12 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -284,7 +284,7 @@
interrupts = <0 43 0x4>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -382,7 +382,7 @@
ranges = <0x0 0x5 0x00000000 0x8000000>;
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -395,7 +395,7 @@
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 440e111651d5..a59b48203688 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -57,12 +57,12 @@
reg = <0x4c>;
};
- eeprom@56 {
+ eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
- eeprom@57 {
+ eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b90..de6af453a6e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -202,7 +202,7 @@
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -361,7 +361,7 @@
#thermal-sensor-cells = <1>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 8cb78dd99672..ebe0cd4bf2b7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -469,7 +469,7 @@
mmu-masters = <&fsl_mc 0x300 0>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
status = "disabled";
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
#address-cells = <1>;
@@ -595,7 +595,7 @@
3 0 0x5 0x20000000 0x00010000>;
};
- qspi: quadspi@20c0000 {
+ qspi: spi@20c0000 {
status = "disabled";
compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
--
2.17.1
next reply other threads:[~2018-09-13 18:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 18:12 Rob Herring [this message]
2018-09-13 18:19 ` [PATCH] arm64: dts: fsl: Fix I2C and SPI bus warnings Li Yang
2018-09-26 9:09 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913181245.25484-19-robh@kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).