From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
To: Rob Herring <robh@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Subject: [PATCH v2 3/3] arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
Date: Mon, 17 Sep 2018 16:02:52 +0800 [thread overview]
Message-ID: <20180917160252.6c016dbc@xhacker.debian> (raw)
In-Reply-To: <20180917160015.05a1fc5b@xhacker.debian>
Add initial dtsi file to support Synaptics AS370 SoC with quad
Cortex-A53 CPUs.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
arch/arm64/boot/dts/synaptics/as370.dtsi | 173 +++++++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644 arch/arm64/boot/dts/synaptics/as370.dtsi
diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi
new file mode 100644
index 000000000000..7331acf3874e
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/as370.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Synaptics Incorporated
+ *
+ * Author: Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "syna,as370";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ l2: cache {
+ compatible = "cache";
+ };
+
+ idle-states {
+ entry-method = "psci";
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <75>;
+ exit-latency-us = <155>;
+ min-residency-us = <1000>;
+ };
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc@f7000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xf7000000 0x1000000>;
+
+ gic: interrupt-controller@901000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x901000 0x1000>,
+ <0x902000 0x2000>,
+ <0x904000 0x2000>,
+ <0x906000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe80000 0x10000>;
+
+ uart0: serial@c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xc00 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@1800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@2000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x2000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+};
--
2.19.0
prev parent reply other threads:[~2018-09-17 8:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-17 8:00 [PATCH v2 0/3] arm64: dts: add Synaptics AS370 SoC support Jisheng Zhang
2018-09-17 8:01 ` [PATCH v2 1/3] dt-bindings: arm: move berlin binding documentation to syna.txt Jisheng Zhang
2018-09-17 8:02 ` [PATCH v2 2/3] dt-bindings: arm: syna: add support for the AS370 SoC Jisheng Zhang
2018-09-26 22:36 ` Rob Herring
2018-09-17 8:02 ` Jisheng Zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180917160252.6c016dbc@xhacker.debian \
--to=jisheng.zhang@synaptics.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).