From: Songjun Wu <songjun.wu@linux.intel.com>
To: yixin.zhu@linux.intel.com, chuanhua.lei@linux.intel.com,
hauke.mehrtens@intel.com
Cc: Songjun Wu <songjun.wu@linux.intel.com>,
devicetree@vger.kernel.org, James Hogan <jhogan@kernel.org>,
linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
Philippe Ombredanne <pombredanne@nexb.com>,
Paul Burton <paul.burton@mips.com>,
Rob Herring <robh+dt@kernel.org>,
Kate Stewart <kstewart@linuxfoundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Rutland <mark.rutland@arm.com>,
Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH 01/14] MIPS: dts: Change upper case to lower case
Date: Mon, 24 Sep 2018 18:27:50 +0800 [thread overview]
Message-ID: <20180924102803.30263-2-songjun.wu@linux.intel.com> (raw)
In-Reply-To: <20180924102803.30263-1-songjun.wu@linux.intel.com>
All the upper case in unit-address and hex constants are
changed to lower case according to the DT conventions.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
arch/mips/boot/dts/lantiq/danube.dtsi | 42 ++++++++++++++++-----------------
arch/mips/boot/dts/lantiq/easy50712.dts | 14 +++++------
2 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 2dd950181f8a..510be63c8bdf 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -10,12 +10,12 @@
};
};
- biu@1F800000 {
+ biu@1f800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
- reg = <0x1F800000 0x800000>;
- ranges = <0x0 0x1F800000 0x7FFFFF>;
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
icu0: icu@80200 {
#interrupt-cells = <1>;
@@ -24,18 +24,18 @@
reg = <0x80200 0x120>;
};
- watchdog@803F0 {
+ watchdog@803f0 {
compatible = "lantiq,wdt";
- reg = <0x803F0 0x10>;
+ reg = <0x803f0 0x10>;
};
};
- sram@1F000000 {
+ sram@1f000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram";
- reg = <0x1F000000 0x800000>;
- ranges = <0x0 0x1F000000 0x7FFFFF>;
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
@@ -66,41 +66,41 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xEEFFFFF>;
- reg = <0x10000000 0xEF00000>;
+ ranges = <0x0 0x10000000 0xeefffff>;
+ reg = <0x10000000 0xef00000>;
- gptu@E100A00 {
+ gptu@e100a00 {
compatible = "lantiq,gptu-xway";
- reg = <0xE100A00 0x100>;
+ reg = <0xe100a00 0x100>;
};
- serial@E100C00 {
+ serial@e100c00 {
compatible = "lantiq,asc";
- reg = <0xE100C00 0x400>;
+ reg = <0xe100c00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
- dma0: dma@E104100 {
+ dma0: dma@e104100 {
compatible = "lantiq,dma-xway";
- reg = <0xE104100 0x800>;
+ reg = <0xe104100 0x800>;
};
- ebu0: ebu@E105300 {
+ ebu0: ebu@e105300 {
compatible = "lantiq,ebu-xway";
- reg = <0xE105300 0x100>;
+ reg = <0xe105300 0x100>;
};
- pci0: pci@E105400 {
+ pci0: pci@e105400 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
- 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
- 0xE105400 0x400>; /* pci bridge */
+ 0xe105400 0x400>; /* pci bridge */
};
};
};
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
index c37a33962f28..1ce20b7d05cb 100644
--- a/arch/mips/boot/dts/lantiq/easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -52,14 +52,14 @@
};
};
- gpio: pinmux@E100B10 {
+ gpio: pinmux@e100b10 {
compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
- reg = <0xE100B10 0xA0>;
+ reg = <0xe100b10 0xa0>;
state_default: pinmux {
stp {
@@ -82,26 +82,26 @@
};
};
- etop@E180000 {
+ etop@e180000 {
compatible = "lantiq,etop-xway";
- reg = <0xE180000 0x40000>;
+ reg = <0xe180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
- stp0: stp@E100BB0 {
+ stp0: stp@e100bb0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
- reg = <0xE100BB0 0x40>;
+ reg = <0xe100bb0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
- pci@E105400 {
+ pci@e105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
--
2.11.0
next prev parent reply other threads:[~2018-09-24 10:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-24 10:27 [PATCH 00/14] serial: langtiq: Add CCF suppport Songjun Wu
2018-09-24 10:27 ` Songjun Wu [this message]
2018-09-24 10:27 ` [PATCH 02/14] MIPS: dts: Add aliases node for lantiq danube serial Songjun Wu
2018-09-24 10:28 ` [PATCH 14/14] dt-bindings: serial: lantiq: Add optional properties for CCF Songjun Wu
2018-10-15 21:58 ` [PATCH 00/14] serial: langtiq: Add CCF suppport Paul Burton
2018-10-16 9:05 ` Wu, Songjun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180924102803.30263-2-songjun.wu@linux.intel.com \
--to=songjun.wu@linux.intel.com \
--cc=chuanhua.lei@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hauke.mehrtens@intel.com \
--cc=jhogan@kernel.org \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=mark.rutland@arm.com \
--cc=paul.burton@mips.com \
--cc=pombredanne@nexb.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=yixin.zhu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).