From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH v3 1/2] dt-bindings: iio: light: bh1750: Add device tree binding documentation Date: Mon, 24 Sep 2018 21:08:49 +0100 Message-ID: <20180924210849.373f765e@archlinux> References: <20180922205754.6100-1-decatf@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180922205754.6100-1-decatf@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: ryang Cc: Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Sat, 22 Sep 2018 16:57:53 -0400 ryang wrote: > Document device tree bindings for ROHM BH1750 ambient light sensor driver. > > Signed-off-by: ryang The devicetree maintainers haven't yet had a chance to look at this so we may well still get feedback from them. As I'm not planning on a pull request for a few days I'll apply this to the tree I push out as testing for the autobuilders to play with. The advantage if this is that isn't a non rebasing tree so I can add acks if they come in before I push it out as togreg ready for a pull request. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > .../devicetree/bindings/iio/light/bh1750.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/bh1750.txt > > diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.txt b/Documentation/devicetree/bindings/iio/light/bh1750.txt > new file mode 100644 > index 000000000000..468350cc7af6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/bh1750.txt > @@ -0,0 +1,18 @@ > +ROHM BH1750 - ALS, Ambient light sensor > + > +Required properties: > + > +- compatible: Must be one of: > + "rohm,bh1710" > + "rohm,bh1715" > + "rohm,bh1721" > + "rohm,bh1750" > + "rohm,bh1751" > +- reg: the I2C address of the sensor > + > +Example: > + > +bh1750@23 { > + compatible = "rohm,bh1750"; > + reg = <0x23>; > +};