From: Vignesh R <vigneshr@ti.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
linux-omap@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Vignesh R <vigneshr@ti.com>
Subject: [PATCH v5 2/2] pci: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode
Date: Tue, 25 Sep 2018 14:00:24 +0530 [thread overview]
Message-ID: <20180925083024.6960-3-vigneshr@ti.com> (raw)
In-Reply-To: <20180925083024.6960-1-vigneshr@ti.com>
Errata i870 is applicable in both EP and RC mode. Therefore rename
function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata
workaround, to dra7xx_pcie_unaligned_memaccess() and call it for both RC
and EP. Make sure driver probe does not fail in case workaround is not
applied for RC mode so as to maintain DT backward compatibility.
Reported-by: Chris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/controller/dwc/pci-dra7xx.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index ce9224a36f62..a32d6dde7a57 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -542,7 +542,7 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
};
/*
- * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
+ * dra7xx_pcie_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
* @dra7xx: the dra7xx device where the workaround should be applied
*
* Access to the PCIe slave port that are not 32-bit aligned will result
@@ -552,7 +552,7 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
*
* To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
*/
-static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
+static int dra7xx_pcie_unaligned_memaccess(struct device *dev)
{
int ret;
struct device_node *np = dev->of_node;
@@ -704,6 +704,11 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
DEVICE_TYPE_RC);
+
+ ret = dra7xx_pcie_unaligned_memaccess(dev);
+ if (ret)
+ dev_err(dev, "WA for Errata i870 not applied\n");
+
ret = dra7xx_add_pcie_port(dra7xx, pdev);
if (ret < 0)
goto err_gpio;
@@ -717,7 +722,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
DEVICE_TYPE_EP);
- ret = dra7xx_pcie_ep_unaligned_memaccess(dev);
+ ret = dra7xx_pcie_unaligned_memaccess(dev);
if (ret)
goto err_gpio;
--
2.19.0
next prev parent reply other threads:[~2018-09-25 8:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-25 8:30 [PATCH v5 0/2] pci-dra7xx: Enable errata i870 workaround for RC mode Vignesh R
2018-09-25 8:30 ` [PATCH v5 1/2] dt-bindings: PCI: dra7xx: Add bindings for unaligned access in host mode Vignesh R
2018-09-25 8:30 ` Vignesh R [this message]
2018-09-25 9:59 ` [PATCH v5 0/2] pci-dra7xx: Enable errata i870 workaround for RC mode Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180925083024.6960-3-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).