From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v9 2/8] dt-bindings: Introduce interconnect binding
Date: Tue, 25 Sep 2018 13:02:15 -0500
Message-ID: <20180925180215.GA12435@bogus>
References: <20180831140151.13972-1-georgi.djakov@linaro.org>
 <20180831140151.13972-3-georgi.djakov@linaro.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20180831140151.13972-3-georgi.djakov@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
To: Georgi Djakov <georgi.djakov@linaro.org>
Cc: linux-pm@vger.kernel.org, gregkh@linuxfoundation.org, rjw@rjwysocki.net, mturquette@baylibre.com, khilman@baylibre.com, vincent.guittot@linaro.org, skannan@codeaurora.org, bjorn.andersson@linaro.org, amit.kucheria@linaro.org, seansw@qti.qualcomm.com, daidavid1@codeaurora.org, evgreen@chromium.org, mark.rutland@arm.com, lorenzo.pieralisi@arm.com, abailon@baylibre.com, maxime.ripard@bootlin.com, arnd@arndb.de, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On Fri, Aug 31, 2018 at 05:01:45PM +0300, Georgi Djakov wrote:
> This binding is intended to represent the relations between the interconnect
> controllers (providers) and consumer device nodes. It will allow creating links
> between consumers and interconnect paths (exposed by interconnect providers).

As I mentioned in person, I want to see other SoC families using this 
before accepting. They don't have to be ready for upstream, but WIP 
patches or even just a "yes, this works for us and we're going to use 
this binding on X".

Also, I think the QCom GPU use of this should be fully sorted out. Or 
more generically how this fits into OPP binding which seems to be never 
ending extended...

> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>  .../bindings/interconnect/interconnect.txt    | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interconnect/interconnect.txt
> 
> diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
> new file mode 100644
> index 000000000000..5cb7d3c8d44d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
> @@ -0,0 +1,60 @@
> +Interconnect Provider Device Tree Bindings
> +=========================================
> +
> +The purpose of this document is to define a common set of generic interconnect
> +providers/consumers properties.
> +
> +
> += interconnect providers =
> +
> +The interconnect provider binding is intended to represent the interconnect
> +controllers in the system. Each provider registers a set of interconnect
> +nodes, which expose the interconnect related capabilities of the interconnect
> +to consumer drivers. These capabilities can be throughput, latency, priority
> +etc. The consumer drivers set constraints on interconnect path (or endpoints)
> +depending on the use case. Interconnect providers can also be interconnect
> +consumers, such as in the case where two network-on-chip fabrics interface
> +directly

missing '.'

> +
> +Required properties:
> +- compatible : contains the interconnect provider compatible string
> +- #interconnect-cells : number of cells in a interconnect specifier needed to
> +			encode the interconnect node id
> +
> +Example:
> +
> +		snoc: snoc@580000 {
> +			compatible = "qcom,msm8916-snoc";
> +			#interconnect-cells = <1>;
> +			reg = <0x580000 0x14000>;
> +			clock-names = "bus_clk", "bus_a_clk";
> +			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> +				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
> +		};
> +
> +
> += interconnect consumers =
> +
> +The interconnect consumers are device nodes which dynamically express their
> +bandwidth requirements along interconnect paths they are connected to. There
> +can be multiple interconnect providers on a SoC and the consumer may consume
> +multiple paths from different providers depending on use case and the
> +components it has to interact with.
> +
> +Required properties:
> +interconnects : Pairs of phandles and interconnect provider specifier to denote
> +	        the edge source and destination ports of the interconnect path.
> +
> +Optional properties:
> +interconnect-names : List of interconnect path name strings sorted in the same
> +		     order as the interconnects property. Consumers drivers will use
> +		     interconnect-names to match interconnect paths with interconnect
> +		     specifiers.

specifier pairs.

> +
> +Example:
> +
> +	sdhci@7864000 {
> +		...
> +		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
> +		interconnect-names = "ddr";
> +	};