From: Tony Lindgren <tony@atomide.com>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: devicetree@vger.kernel.org, "Dave Gerlach" <d-gerlach@ti.com>,
Keerthy <j-keerthy@ti.com>, "Tero Kristo" <t-kristo@ti.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc
Date: Wed, 26 Sep 2018 16:31:11 -0700 [thread overview]
Message-ID: <20180926233111.GY5662@atomide.com> (raw)
In-Reply-To: <cfc3f1db-9468-ed92-a673-882b51b4dec8@ti.com>
* Grygorii Strashko <grygorii.strashko@ti.com> [180926 21:41]:
> On 09/26/2018 11:23 AM, Tony Lindgren wrote:
> > +static int __maybe_unused omap_i2c_suspend(struct device *dev)
> > +{
> > + struct omap_i2c_dev *ddata = dev_get_drvdata(dev);
> > + int error;
> > +
> > + /* Is device still enabled because of autosuspend? */
> > + if (ddata->is_suspended)
> > + return 0;
>
> Sry, but you can't do this. There is no sync between suspend and PM runtime.
>
>
> > +
> > + /* Paired with call in omap_i2c_resume() */
> > + error = pm_runtime_put_sync_suspend(dev);
>
> This is nop!!! More over, in general you can't predict how many times pm_runtime_get was called and
> what's the current value of usage_count.
Hmm yeah that's a good point.
> To make things work the pm_runtime_force_xx() have to be used, or
> like with omap_device, platform/bus code have to handle device state
> at suspend_no_irq stage.
OK. So looks like the other i2c bus drivers have already solved it
with simply SET_NOIRQ_SYSTEM_SLEEP_PM_OPS which is along the lines
you're suggesting.
The following works for me, does it look OK to you?
Regards,
Tony
8< ---------------------
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1498,8 +1498,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int omap_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
{
struct omap_i2c_dev *omap = dev_get_drvdata(dev);
@@ -1525,7 +1524,7 @@ static int omap_i2c_runtime_suspend(struct device *dev)
return 0;
}
-static int omap_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
{
struct omap_i2c_dev *omap = dev_get_drvdata(dev);
@@ -1540,20 +1539,18 @@ static int omap_i2c_runtime_resume(struct device *dev)
}
static const struct dev_pm_ops omap_i2c_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
omap_i2c_runtime_resume, NULL)
};
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif /* CONFIG_PM */
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
- .pm = OMAP_I2C_PM_OPS,
+ .pm = &omap_i2c_pm_ops,
.of_match_table = of_match_ptr(omap_i2c_of_match),
},
};
--
2.19.0
next prev parent reply other threads:[~2018-09-26 23:31 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-25 0:05 [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc Tony Lindgren
2018-09-25 0:05 ` [PATCH 1/4] ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-09-25 0:05 ` [PATCH 2/4] ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc Tony Lindgren
2018-12-04 12:23 ` Peter Ujfalusi
2018-12-04 18:11 ` Tony Lindgren
2018-12-04 23:18 ` Tony Lindgren
2018-12-05 6:14 ` Peter Ujfalusi
2018-12-05 19:00 ` Tony Lindgren
2018-12-05 23:02 ` Tony Lindgren
2018-12-07 12:46 ` Peter Ujfalusi
2018-09-25 0:05 ` [PATCH 3/4] ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-09-27 14:56 ` Tony Lindgren
2018-09-25 0:05 ` [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc Tony Lindgren
2018-11-27 13:03 ` Peter Ujfalusi
2018-11-27 16:16 ` Tony Lindgren
2018-11-28 12:52 ` Peter Ujfalusi
2018-11-29 19:07 ` Tony Lindgren
2018-09-25 5:14 ` [PATCH 0/4] Update am437x and am335x dts to probe " Keerthy
2018-09-25 14:40 ` Tony Lindgren
2018-09-25 17:55 ` Tony Lindgren
2018-09-25 21:16 ` Grygorii Strashko
2018-09-26 4:08 ` Keerthy
2018-09-26 15:59 ` Tony Lindgren
2018-09-26 16:23 ` Tony Lindgren
2018-09-26 21:36 ` Grygorii Strashko
2018-09-26 23:31 ` Tony Lindgren [this message]
2018-09-27 4:55 ` Keerthy
2018-09-27 14:53 ` Tony Lindgren
2018-09-27 21:43 ` Tony Lindgren
2018-10-01 16:32 ` Tony Lindgren
2018-10-04 4:29 ` Keerthy
2018-10-04 14:23 ` Tony Lindgren
2018-09-27 19:11 ` Grygorii Strashko
2018-09-27 19:38 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180926233111.GY5662@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).