From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCh v3 3/4] arm64: add support for i.MX8M EVK board Date: Thu, 27 Sep 2018 14:16:06 -0500 Message-ID: <20180927191606.GA7705@bogus> References: <20180921125626.21971-1-l.stach@pengutronix.de> <20180921125626.21971-3-l.stach@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20180921125626.21971-3-l.stach@pengutronix.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Lucas Stach Cc: Mark Rutland , devicetree@vger.kernel.org, Abel Vesa , Catalin Marinas , Will Deacon , patchwork-lst@pengutronix.de, NXP Linux Team , Pengutronix Kernel Team , Fabio Estevam , Shawn Guo , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Fri, 21 Sep 2018 14:56:25 +0200, Lucas Stach wrote: > This is the evaluation kit board for the i.MX8M. The current level of > support yields a working console and is able to boot userspace from > SD card or Network. > > Signed-off-by: Lucas Stach > Reviewed-by: Fabio Estevam (v1) > Tested-by: Tested-by: Baruch Siach (v1) > --- > v2: > - move to freescale folder > - fix indentation > - fix typo in Makefile > - document compatible > - switch to generic pinconf > v3: > - rebase to v4.19-rc1 and already merged pinctrl driver and pending > clk driver > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > arch/arm64/boot/dts/freescale/Makefile | 2 + > arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 291 ++++++++++++++++++ > 3 files changed, 297 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-evk.dts > Reviewed-by: Rob Herring