From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH v2 net-next 2/2] dt-bindings: net: add support for Microchip KSZ9131 Ethernet PHY Date: Thu, 27 Sep 2018 21:45:50 +0200 Message-ID: <20180927194550.GL12979@lunn.ch> References: <1538079415-6260-1-git-send-email-yuiko.oshino@microchip.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1538079415-6260-1-git-send-email-yuiko.oshino@microchip.com> Sender: linux-kernel-owner@vger.kernel.org To: Yuiko Oshino Cc: davem@davemloft.net, robh+dt@kernel.org, devicetree@vger.kernel.org, f.fainelli@gmail.com, linux-kernel@vger.kernel.org, mark.rutland@arm.com, m.felsch@pengutronix.de, Markus.Niebel@tqs.de, netdev@vger.kernel.org, UNGLinuxDriver@microchip.com List-Id: devicetree@vger.kernel.org On Thu, Sep 27, 2018 at 04:16:55PM -0400, Yuiko Oshino wrote: > Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY > > Signed-off-by: Yuiko Oshino > --- > .../devicetree/bindings/net/micrel-ksz90x1.txt | 29 +++++++++++++++++++++- > 1 file changed, 28 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt > index e22d8cf..d23d14a 100644 > --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt > +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt > @@ -1,4 +1,4 @@ > -Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY > +Micrel/Microchip KSZ9021/KSZ9031/KSZ9131 Gigabit Ethernet PHY > > Some boards require special tuning values, particularly when it comes > to clock delays. You can specify clock delay values in the PHY OF > @@ -64,6 +64,33 @@ KSZ9031: > Attention: The link partner must be configurable as slave otherwise > no link will be established. > > +KSZ9131: > + > + All skew control options are specified in picoseconds. The minimum > + value is 0, and the maximum is property-dependent. The increment > + step is 100ps. The default value is the neutral setting, so setting > + rxc-skew-ps=<0> actually results in -700 picoseconds adjustment. We also have: KSZ9021: All skew control options are specified in picoseconds. The minimum value is 0, the maximum value is 3000, and it is incremented by 200ps steps. and KSZ9031: All skew control options are specified in picoseconds. The minimum value is 0, and the maximum is property-dependent. The increment step is 60ps. The default value is the neutral setting, so setting rxc-skew-ps=<0> actually results in -900 picoseconds adjustment. So this is the third meaning of 0. How about making 0 mean 0. Have the range being -700 to 1800 and -700 to 800? KSZ9031 and KSZ9131 then use the same meaning of 0, with 0 actually meaning 0! Andrew