From mboxrd@z Thu Jan 1 00:00:00 1970 From: Quentin Schulz Subject: [PATCH net-next v4 08/11] MIPS: mscc: ocelot: add SerDes mux DT node Date: Thu, 4 Oct 2018 14:22:05 +0200 Message-ID: <20181004122208.32272-9-quentin.schulz@bootlin.com> References: <20181004122208.32272-1-quentin.schulz@bootlin.com> Return-path: In-Reply-To: <20181004122208.32272-1-quentin.schulz@bootlin.com> Sender: linux-kernel-owner@vger.kernel.org To: alexandre.belloni@bootlin.com, ralf@linux-mips.org, paul.burton@mips.com, jhogan@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, davem@davemloft.net, kishon@ti.com, andrew@lunn.ch, f.fainelli@gmail.com Cc: allan.nielsen@microchip.com, linux-mips@linux-mips.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, thomas.petazzoni@bootlin.com, Quentin Schulz List-Id: devicetree@vger.kernel.org The Microsemi Ocelot has a set of register for SerDes/switch port muxing as well as PCIe muxing for a specific SerDes, so let's add the device and all SerDes in the Device Tree. Reviewed-by: Florian Fainelli Acked-by: Paul Burton Signed-off-by: Quentin Schulz --- arch/mips/boot/dts/mscc/ocelot.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index 149b1a7e7091..8ce317c5b9ed 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -234,6 +234,11 @@ hsio: syscon@10d0000 { compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; reg = <0x10d0000 0x10000>; + + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + }; }; }; }; -- 2.17.1