Re: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba

[Boris Brezillon <boris.brezillon@bootlin.com>]

On Thu, 4 Oct 2018 16:42:22 +0530
Vignesh R <vigneshr@ti.com> wrote:

> On Thursday 04 October 2018 03:15 PM, Boris Brezillon wrote:
> > On Wed, 3 Oct 2018 22:26:01 +0530
> > Vignesh R <vigneshr@ti.com> wrote:
> >   
> >> Micron's mt35xu512aba flash is an Octal flash that has x8 IO lines. It
> >> supports read/write over 8 IO lines simulatenously. Add support for
> >> Octal read mode for Micron mt35xu512aba.
> >> Unfortunately, this flash is only complaint to SFDP JESD216B and does not
> >> seem to support newer JESD216C standard that provides auto detection of
> >> Octal mode capabilities and opcodes. Therefore, this capability is
> >> manually added using new SPI_NOR_OCTAL_READ flag.
> >>
> >> Signed-off-by: Vignesh R <vigneshr@ti.com>
> >> ---
> >>  drivers/mtd/spi-nor/spi-nor.c | 11 ++++++++++-
> >>  include/linux/mtd/spi-nor.h   |  2 ++
> >>  2 files changed, 12 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> >> index aff5e6ff0b2c..4926e805a8cb 100644
> >> --- a/drivers/mtd/spi-nor/spi-nor.c
> >> +++ b/drivers/mtd/spi-nor/spi-nor.c
> >> @@ -90,6 +90,7 @@ struct flash_info {
> >>  #define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
> >>  #define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
> >>  #define USE_CLSR		BIT(14)	/* use CLSR command */
> >> +#define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */  
> > 
> > Hm, we'll need to clarify what OCTAL means. I see at least 3 different
> > modes using 8 IO lines (1-1-8, 1-8-8 and 8-8-8) and all of them could
> > be qualified as "octal" modes.
> > So how about renaming this macro SPI_NOR_1_1_8_READ.
> >   
> 
> My understanding is that, if a flash is Octal IO capable, then it
> supports all mode of Octal IO (1-1-8, 1-8-8 and 8-8-8). At least in the
> current code, I see SPI_NOR_QUAD_READ seems to imply 1-1-4, 1-4-4 and
> 4-4-4 modes.

I already have one NOR which is not following this rule (mx25uw51245g)
and is only supporting 1-1-1 and 8-8-8, nothing in between.

> Moreover, these capabilities should be auto discoverable once flash
> start populating SFDP JESD216C tables (IIRC, JESD216B already takes care
> of QUAD IO modes). So, I don't think we need different flags for 1-1-8,
> 1-8-8 and 8-8-8. Please let me if that's not the case.

Except we already have NORs out there that do not have a valid SFDP
table but still support a subset of the octal modes (mx25uw51245g is in
this case, but I'm pretty sure there are others).

> 
> For this patch, I wanted to start small and support only 1-1-8 mode
> which is the easiest.

Which is fine, just wanted to know what SPI_NOR_OCTAL_READ meant.

> 
> 
> > Also, I fear we'll soon run out of bits in ->flags if we keep adding
> > one flag per mode which is why I proposed a solution to let flash
> > chips tweak the flash parameters as they wish [1][2]. I'm not saying we
> > should do it now, but we should definitely plan for something like that.
> > 
> > [1]https://github.com/bbrezillon/linux/commit/9c672e4c85a91f1b0803c9c6e4b8f3aae5d79ffb
> > [2]https://github.com/bbrezillon/linux/commit/3a5515c8821314c06a3d84f9861aefe476bb711e
> >   
> 
> Hmm, it almost seems like Macronix flash warrants its own driver now.
> 

Actually, we already have quite a bit of code that is vendor (and even
chip) specific in spi-nor.c, and I indeed think it would be beneficial
to have one driver per manufacturer so that the core is not polluted by
those chip/manufacturer specific hacks. The thing is, the spi_nor
interface (and the way hwcaps selection works) is not ready for that.