[PATCH v2 7/9] arm64: dts: allwinner: a64: add nodes necessary for analog sound support

Vasily Khoruzhick
2018-10-13T16:53:27Z

Add nodes for i2s, digital and analog parts of audiocodec on A64

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 58 +++++++++++++++++++
1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d3daf90a8715..d066ed59f27a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -157,6 +157,34 @@
compatible = "linux,spdif-dit";
};

+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-a64-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,mclk-fs = <512>;
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left ADC", "ADC",
+ "Right ADC", "ADC",
+ "MIC1", "Mic",
+ "MIC2", "Headset Mic";
+ status = "disabled";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&dai>;
+ };
+
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@@ -522,6 +550,30 @@
status = "disabled";
};

+ dai: dai@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-a64-codec-i2s";
+ reg = <0x01c22c00 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_CODEC>;
+ reset-names = "rst";
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ codec: codec@1c22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x600>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -715,6 +767,12 @@
#reset-cells = <1>;
};

+ codec_analog: codec-analog@1f015c0 {
+ compatible = "allwinner,sun50i-a64-codec-analog";
+ reg = <0x01f015c0 0x4>;
+ status = "disabled";
+ };
+
r_i2c: i2c@1f02400 {
compatible = "allwinner,sun50i-a64-i2c",
"allwinner,sun6i-a31-i2c";
--
2.19.0