From: Peter Chen <peter.chen@nxp.com>
To: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"frieder.schrempf@exceet.de" <frieder.schrempf@exceet.de>
Cc: dl-linux-imx <linux-imx@nxp.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Peter Chen <peter.chen@nxp.com>
Subject: [PATCH 1/4] usb: chipidea: add flag for imx hsic implementation
Date: Tue, 16 Oct 2018 05:01:19 +0000 [thread overview]
Message-ID: <20181016045846.2345-2-peter.chen@nxp.com> (raw)
In-Reply-To: <20181016045846.2345-1-peter.chen@nxp.com>
NXP (Freecale) imx HSIC design has some special requirements, add
some flags at host code to handle them.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/chipidea/host.c | 24 ++++++++++++++++++++++++
include/linux/usb/chipidea.h | 3 +++
2 files changed, 27 insertions(+)
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index d858a82c4f44..d74a13d7c21c 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -28,6 +28,20 @@ struct ehci_ci_priv {
struct regulator *reg_vbus;
};
+/* This function is used to override WKCN, WKDN, and WKOC */
+static void ci_ehci_override_wakeup_flag(struct ehci_hcd *ehci,
+ u32 __iomem *reg, u32 flags, bool set)
+{
+ u32 val = ehci_readl(ehci, reg);
+
+ if (set)
+ val |= flags;
+ else
+ val &= ~flags;
+
+ ehci_writel(ehci, val, reg);
+}
+
static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -170,6 +184,11 @@ static int host_start(struct ci_hdrc *ci)
otg->host = &hcd->self;
hcd->self.otg_port = 1;
}
+
+ if (ci->platdata->notify_event &&
+ (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC))
+ ci->platdata->notify_event
+ (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT);
}
return ret;
@@ -218,6 +237,8 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct device *dev = hcd->self.controller;
+ struct ci_hdrc *ci = dev_get_drvdata(dev);
int port;
u32 tmp;
@@ -249,6 +270,9 @@ static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
* It needs a short delay between set RS bit and PHCD.
*/
usleep_range(150, 200);
+ if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)
+ ci_ehci_override_wakeup_flag(ehci, reg,
+ PORT_WKDISC_E | PORT_WKCONN_E, false);
break;
}
}
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 63758c399e4e..911e05af671e 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -60,9 +60,12 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
#define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */
#define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)
+#define CI_HDRC_IMX_IS_HSIC BIT(14)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
+#define CI_HDRC_IMX_HSIC_ACTIVE_EVENT 2
+#define CI_HDRC_IMX_HSIC_SUSPEND_EVENT 3
int (*notify_event) (struct ci_hdrc *ci, unsigned event);
struct regulator *reg_vbus;
struct usb_otg_caps ci_otg_caps;
--
2.14.1
next prev parent reply other threads:[~2018-10-16 12:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-16 5:01 [PATCH 0/4] usb: chipidea: imx: add HSIC support Peter Chen
2018-10-16 5:01 ` Peter Chen [this message]
2018-10-16 5:01 ` [PATCH 2/4] " Peter Chen
2018-10-16 5:52 ` kbuild test robot
2018-10-16 6:07 ` Peter Chen
2018-10-17 7:03 ` Frieder Schrempf
2018-10-18 1:18 ` Peter Chen
2018-10-16 5:01 ` [PATCH 3/4] usb: chipidea: host: override ehci->hub_control Peter Chen
2018-10-16 5:01 ` [PATCH 4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups Peter Chen
2018-10-16 16:24 ` Fabio Estevam
2018-10-17 1:04 ` Peter Chen
2018-10-17 7:02 ` [PATCH 0/4] usb: chipidea: imx: add HSIC support Frieder Schrempf
2018-10-17 7:23 ` Peter Chen
2018-10-17 9:56 ` Frieder Schrempf
2018-10-17 11:04 ` Frieder Schrempf
2018-10-17 14:59 ` Frieder Schrempf
2018-10-18 1:22 ` Peter Chen
2018-10-18 7:46 ` Frieder Schrempf
2018-10-18 8:48 ` Peter Chen
2018-10-18 8:56 ` Frieder Schrempf
2018-10-18 9:04 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181016045846.2345-2-peter.chen@nxp.com \
--to=peter.chen@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=frieder.schrempf@exceet.de \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).