From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pramod Kumar Subject: [PATCH] arm64: dts: ls1012a: Add FRWY-LS1012A board support Date: Tue, 16 Oct 2018 07:40:29 +0000 Message-ID: <20181016074102.10126-1-pramod.kumar_1@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: "devicetree@vger.kernel.org" , Leo Li , "shawnguo@kernel.org" Cc: "linux-arm-kernel@lists.infradead.org" List-Id: devicetree@vger.kernel.org LS1012A-FRWY is an ls1012a based SoC board. Key features of this board are Micro SD, USB 3.0, upto 1GB DDR, UART Signed-off-by: Pramod Kumar --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1012a-frwy.dts | 25 +++++++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 86e18adb695a..25a9fb766438 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts new file mode 100644 index 000000000000..8749634c55ee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Freescale LS1012A FRWY Board. + * + * Copyright 2018 NXP + * + * Pramod Kumar + * + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A FRWY Board"; + compatible = "fsl,ls1012a-frwy", "fsl,ls1012a"; +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; -- 2.17.1