From: Lina Iyer <ilina@codeaurora.org>
To: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
Cc: andy.gross@linaro.org, david.brown@linaro.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
rnayak@codeaurora.org, bjorn.andersson@linaro.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, sboyd@kernel.org,
evgreen@chromium.org, dianders@chromium.org, mka@chromium.org
Subject: Re: [PATCH] arm64: dts: sdm845: Add PSCI cpuidle low power states
Date: Fri, 19 Oct 2018 13:48:03 -0600 [thread overview]
Message-ID: <20181019194803.GC17444@codeaurora.org> (raw)
In-Reply-To: <1539622953-4188-1-git-send-email-rplsssn@codeaurora.org>
On Mon, Oct 15 2018 at 11:02 -0600, Raju P.L.S.S.S.N wrote:
>Add device bindings for cpuidle states for cpu devices.
>
>Cc: <devicetree@vger.kernel.org>
>Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
>---
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 62 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
>diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>index 0c9a2aa..32262b0 100644
>--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>@@ -96,6 +96,7 @@
> reg = <0x0 0x0>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
>+ cpu-idle-states = <&C0_CPU_SPC &C0_CPU_PC &CLUSTER_PC>;
> L2_0: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
>@@ -111,6 +112,7 @@
> reg = <0x0 0x100>;
> enable-method = "psci";
> next-level-cache = <&L2_100>;
>+ cpu-idle-states = <&C0_CPU_SPC &C0_CPU_PC &CLUSTER_PC>;
> L2_100: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
>@@ -123,6 +125,7 @@
> reg = <0x0 0x200>;
> enable-method = "psci";
> next-level-cache = <&L2_200>;
>+ cpu-idle-states = <&C0_CPU_SPC &C0_CPU_PC &CLUSTER_PC>;
> L2_200: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
>@@ -135,6 +138,7 @@
> reg = <0x0 0x300>;
> enable-method = "psci";
> next-level-cache = <&L2_300>;
>+ cpu-idle-states = <&C0_CPU_SPC &C0_CPU_PC &CLUSTER_PC>;
> L2_300: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
>@@ -147,6 +151,7 @@
> reg = <0x0 0x400>;
> enable-method = "psci";
> next-level-cache = <&L2_400>;
>+ cpu-idle-states = <&C4_CPU_SPC &C4_CPU_PC &CLUSTER_PC>;
> L2_400: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
>@@ -159,6 +164,7 @@
> reg = <0x0 0x500>;
> enable-method = "psci";
> next-level-cache = <&L2_500>;
>+ cpu-idle-states = <&C4_CPU_SPC &C4_CPU_PC &CLUSTER_PC>;
> L2_500: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
>@@ -171,6 +177,7 @@
> reg = <0x0 0x600>;
> enable-method = "psci";
> next-level-cache = <&L2_600>;
>+ cpu-idle-states = <&C4_CPU_SPC &C4_CPU_PC &CLUSTER_PC>;
> L2_600: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
>@@ -183,11 +190,66 @@
> reg = <0x0 0x700>;
> enable-method = "psci";
> next-level-cache = <&L2_700>;
>+ cpu-idle-states = <&C4_CPU_SPC &C4_CPU_PC &CLUSTER_PC>;
> L2_700: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> };
> };
>+
>+ idle-states {
>+ entry-method = "psci";
>+
>+ C0_CPU_SPC: c0_spc {
>+ compatible = "arm,idle-state";
>+ arm,psci-suspend-param = <0x40000003>;
>+ entry-latency-us = <350>;
>+ exit-latency-us = <461>;
>+ min-residency-us = <1890>;
>+ local-timer-stop;
>+ idle-state-name = "pc";
>+ };
>+
>+ C0_CPU_PC: c0_pc {
>+ compatible = "arm,idle-state";
>+ arm,psci-suspend-param = <0x40000004>;
>+ entry-latency-us = <360>;
>+ exit-latency-us = <531>;
>+ min-residency-us = <3934>;
>+ local-timer-stop;
>+ idle-state-name = "rail pc";
>+ };
>+
>+ C4_CPU_SPC: c4_spc {
>+ compatible = "arm,idle-state";
>+ arm,psci-suspend-param = <0x40000003>;
>+ entry-latency-us = <264>;
>+ exit-latency-us = <621>;
>+ min-residency-us = <952>;
>+ local-timer-stop;
>+ idle-state-name = "pc";
>+ };
>+
>+ C4_CPU_PC: c4_pc {
>+ compatible = "arm,idle-state";
>+ arm,psci-suspend-param = <0x40000004>;
>+ entry-latency-us = <702>;
>+ exit-latency-us = <1061>;
>+ min-residency-us = <4488>;
>+ local-timer-stop;
>+ idle-state-name = "rail pc";
>+ };
>+
>+ CLUSTER_PC: cluster_pc {
>+ compatible = "arm,idle-state";
>+ arm,psci-suspend-param = <0x400000F4>;
>+ entry-latency-us = <3263>;
>+ exit-latency-us = <6562>;
>+ min-residency-us = <9987>;
>+ local-timer-stop;
>+ idle-state-name = "cluster pc";
>+ };
>+ };
> };
>
> pmu {
>--
>QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>of the Code Aurora Forum, hosted by The Linux Foundation.
>
next prev parent reply other threads:[~2018-10-19 19:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-15 17:02 [PATCH] arm64: dts: sdm845: Add PSCI cpuidle low power states Raju P.L.S.S.S.N
2018-10-19 19:48 ` Lina Iyer [this message]
2018-10-22 18:34 ` Evan Green
2018-10-23 18:36 ` Doug Anderson
2018-10-30 16:23 ` Raju P L S S S N
2018-10-30 16:52 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181019194803.GC17444@codeaurora.org \
--to=ilina@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mka@chromium.org \
--cc=rnayak@codeaurora.org \
--cc=rplsssn@codeaurora.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).