* [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation
@ 2018-10-17 22:27 Kun Yi
2018-10-18 19:47 ` Rob Herring
2018-10-27 17:27 ` Guenter Roeck
0 siblings, 2 replies; 4+ messages in thread
From: Kun Yi @ 2018-10-17 22:27 UTC (permalink / raw)
Cc: openbmc, kunyi, Jean Delvare, Guenter Roeck, Rob Herring,
Mark Rutland, linux-hwmon, devicetree, linux-kernel
adm127x are hot-swap controllers that allow a circuit board to be removed from
or inserted into a live backplane. This patch adds the device tree
bindings documentation.
Signed-off-by: Kun Yi <kunyi@google.com>
---
.../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
new file mode 100644
index 000000000000..1ecd03f3da4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt
@@ -0,0 +1,25 @@
+adm1275 properties
+
+Required properties:
+- compatible: Must be one of the supported compatible strings:
+ - "adi,adm1075" for adm1075
+ - "adi,adm1272" for adm1272
+ - "adi,adm1275" for adm1275
+ - "adi,adm1276" for adm1276
+ - "adi,adm1278" for adm1278
+ - "adi,adm1293" for adm1293
+ - "adi,adm1294" for adm1294
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor-micro-ohms
+ Shunt resistor value in micro-Ohm
+
+Example:
+
+adm1272@10 {
+ compatible = "adi,adm1272";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <500>;
+};
--
2.19.1.331.ge82ca0e54c-goog
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation
2018-10-17 22:27 [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation Kun Yi
@ 2018-10-18 19:47 ` Rob Herring
2018-10-18 20:39 ` Kun Yi
2018-10-27 17:27 ` Guenter Roeck
1 sibling, 1 reply; 4+ messages in thread
From: Rob Herring @ 2018-10-18 19:47 UTC (permalink / raw)
Cc: openbmc, kunyi, Jean Delvare, Guenter Roeck, Mark Rutland,
linux-hwmon, devicetree, linux-kernel
On Wed, 17 Oct 2018 15:27:09 -0700, Kun Yi wrote:
> adm127x are hot-swap controllers that allow a circuit board to be removed from
> or inserted into a live backplane. This patch adds the device tree
> bindings documentation.
>
> Signed-off-by: Kun Yi <kunyi@google.com>
> ---
> .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation
2018-10-18 19:47 ` Rob Herring
@ 2018-10-18 20:39 ` Kun Yi
0 siblings, 0 replies; 4+ messages in thread
From: Kun Yi @ 2018-10-18 20:39 UTC (permalink / raw)
To: robh
Cc: OpenBMC Maillist, jdelvare, Guenter Roeck, mark.rutland,
linux-hwmon, devicetree, linux-kernel
On Thu, Oct 18, 2018 at 12:48 PM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, 17 Oct 2018 15:27:09 -0700, Kun Yi wrote:
> > adm127x are hot-swap controllers that allow a circuit board to be removed from
> > or inserted into a live backplane. This patch adds the device tree
> > bindings documentation.
> >
> > Signed-off-by: Kun Yi <kunyi@google.com>
> > ---
> > .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
> >
>
> Reviewed-by: Rob Herring <robh@kernel.org>
Thanks a lot for the Review!
--
Regards,
Kun
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation
2018-10-17 22:27 [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation Kun Yi
2018-10-18 19:47 ` Rob Herring
@ 2018-10-27 17:27 ` Guenter Roeck
1 sibling, 0 replies; 4+ messages in thread
From: Guenter Roeck @ 2018-10-27 17:27 UTC (permalink / raw)
To: Kun Yi
Cc: openbmc, Jean Delvare, Rob Herring, Mark Rutland, linux-hwmon,
devicetree, linux-kernel
On Wed, Oct 17, 2018 at 03:27:09PM -0700, Kun Yi wrote:
> adm127x are hot-swap controllers that allow a circuit board to be removed from
> or inserted into a live backplane. This patch adds the device tree
> bindings documentation.
>
> Signed-off-by: Kun Yi <kunyi@google.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
> new file mode 100644
> index 000000000000..1ecd03f3da4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt
> @@ -0,0 +1,25 @@
> +adm1275 properties
> +
> +Required properties:
> +- compatible: Must be one of the supported compatible strings:
> + - "adi,adm1075" for adm1075
> + - "adi,adm1272" for adm1272
> + - "adi,adm1275" for adm1275
> + - "adi,adm1276" for adm1276
> + - "adi,adm1278" for adm1278
> + - "adi,adm1293" for adm1293
> + - "adi,adm1294" for adm1294
> +- reg: I2C address
> +
> +Optional properties:
> +
> +- shunt-resistor-micro-ohms
> + Shunt resistor value in micro-Ohm
> +
> +Example:
> +
> +adm1272@10 {
> + compatible = "adi,adm1272";
> + reg = <0x10>;
> + shunt-resistor-micro-ohms = <500>;
> +};
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-10-27 17:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-10-17 22:27 [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation Kun Yi
2018-10-18 19:47 ` Rob Herring
2018-10-18 20:39 ` Kun Yi
2018-10-27 17:27 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).