devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Cc: Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width
Date: Thu,  1 Nov 2018 00:06:28 +0530	[thread overview]
Message-ID: <20181031183634.29640-1-jagan@amarulasolutions.com> (raw)

MUX bits for MMC clock register range are 25:24 where 24 is shift
and 2 is width So fix the width number from 3 to 2.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 2193e1495086..e2bc612f1d3e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -411,7 +411,7 @@ static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
 static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
 					  0, 4,		/* M */
 					  8, 2,		/* N */
-					  24, 3,	/* mux */
+					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
 					  0);
@@ -419,7 +419,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
 static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
 					  0, 4,		/* M */
 					  8, 2,		/* N */
-					  24, 3,	/* mux */
+					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
 					  0);
@@ -427,7 +427,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
 static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
 					  0, 4,		/* M */
 					  8, 2,		/* N */
-					  24, 3,	/* mux */
+					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
 					  0);
-- 
2.18.0.321.gffc6fa0e3

             reply	other threads:[~2018-10-31 18:36 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-31 18:36 Jagan Teki [this message]
     [not found] ` <20181031183634.29640-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-10-31 18:36   ` [PATCH 2/7] arm64: allwinner: h6: Add common orangepi nodes into dtsi Jagan Teki
     [not found]     ` <20181031183634.29640-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01  2:53       ` Chen-Yu Tsai
     [not found]         ` <CAGb2v66ALW1EL5+buporX8cPjkfpNdwGJEVUrC9Xpcmt3-NX7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  7:13           ` Jagan Teki
     [not found]             ` <CAMty3ZCv9z=uALo-PShS-RegNt2cOwOHWE=6vsRVgPm9oOQ_Fw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  7:20               ` Chen-Yu Tsai
2018-10-31 18:36   ` [PATCH 3/7] arm64: allwinner: h6: Add OrangePi Lite2 initial support Jagan Teki
2018-10-31 18:36   ` [PATCH 4/7] arm64: allwinner: h6: Add MMC1 pinmux Jagan Teki
2018-10-31 18:36   ` [PATCH 6/7] arm64: allwinner: h6: Add RTC clock to phandle 32kHz external oscillator Jagan Teki
     [not found]     ` <20181031183634.29640-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01  2:57       ` Chen-Yu Tsai
2018-10-31 18:36 ` [PATCH 5/7] arm64: allwinner: h6: Add RTC node Jagan Teki
     [not found]   ` <20181031183634.29640-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01  2:55     ` Chen-Yu Tsai
     [not found]       ` <CAGb2v64fnpCh_rCy-9m8xgXmAZQGab1==f7cr332QfgueyuRNw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  7:33         ` Jagan Teki
     [not found]           ` <CAMty3ZAW5KndyJj81obK49MKczdbk4SoUncmiiE_OhH1g7qFUA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  7:53             ` Chen-Yu Tsai
     [not found]               ` <CAGb2v67WZmG7qPqf_UoR4v=Zm2AbS8pcOQsWJPRVHr-i2NvRPA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  9:02                 ` Jagan Teki
     [not found]                   ` <CAMty3ZBJiDrr0hqgzMMQ76R7=+agsHyjYQGTrebH=_q5Ax2xXA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  9:35                     ` Chen-Yu Tsai
2018-10-31 18:36 ` [RFC PATCH 7/7] arm64: allwinner: h6: orangepi-liet2: Enable AP6356S WiFi support Jagan Teki
     [not found]   ` <20181031183634.29640-7-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01  7:35     ` Jagan Teki
     [not found]       ` <CAMty3ZCeZzXYy4XRwTeQjYfpB6KKjEVRWyhjoca9Os4foLYL4g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  7:58         ` Chen-Yu Tsai
     [not found]           ` <CAGb2v67xCnH20Hga2P2Ekk3vhhOWUSgtOmRVAte+HDuodjsjkw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  9:08             ` Jagan Teki
     [not found]               ` <CAMty3ZBNdg43nL-HviyHufwQtTbC4wv20JVYBBT8LDpWiV0wTQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01  9:49                 ` Chen-Yu Tsai
2018-11-05  8:41 ` [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181031183634.29640-1-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=devicetree@vger.kernel.org \
    --cc=icenowy@aosc.io \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).