From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Cc: Jagan Teki <jagan@openedev.com>
Subject: [PATCH 5/7] arm64: allwinner: h6: Add RTC node
Date: Thu, 1 Nov 2018 00:06:32 +0530 [thread overview]
Message-ID: <20181031183634.29640-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181031183634.29640-1-jagan@amarulasolutions.com>
From: Jagan Teki <jagan@openedev.com>
RTC controller is similar to A31, so use the same compatible
for H6 and update interrupt numbers as per manual.
Signed-off-by: Jagan Teki <jagan@openedev.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 3b9da12e65db..c8d2fe76da7e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -266,6 +266,13 @@
status = "disabled";
};
+ rtc: rtc@7000000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x7000000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-10-31 18:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 18:36 [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width Jagan Teki
2018-10-31 18:36 ` Jagan Teki [this message]
[not found] ` <20181031183634.29640-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01 2:55 ` [PATCH 5/7] arm64: allwinner: h6: Add RTC node Chen-Yu Tsai
[not found] ` <CAGb2v64fnpCh_rCy-9m8xgXmAZQGab1==f7cr332QfgueyuRNw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 7:33 ` Jagan Teki
[not found] ` <CAMty3ZAW5KndyJj81obK49MKczdbk4SoUncmiiE_OhH1g7qFUA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 7:53 ` Chen-Yu Tsai
[not found] ` <CAGb2v67WZmG7qPqf_UoR4v=Zm2AbS8pcOQsWJPRVHr-i2NvRPA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 9:02 ` Jagan Teki
[not found] ` <CAMty3ZBJiDrr0hqgzMMQ76R7=+agsHyjYQGTrebH=_q5Ax2xXA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 9:35 ` Chen-Yu Tsai
[not found] ` <20181031183634.29640-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-10-31 18:36 ` [PATCH 2/7] arm64: allwinner: h6: Add common orangepi nodes into dtsi Jagan Teki
[not found] ` <20181031183634.29640-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01 2:53 ` Chen-Yu Tsai
[not found] ` <CAGb2v66ALW1EL5+buporX8cPjkfpNdwGJEVUrC9Xpcmt3-NX7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 7:13 ` Jagan Teki
[not found] ` <CAMty3ZCv9z=uALo-PShS-RegNt2cOwOHWE=6vsRVgPm9oOQ_Fw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 7:20 ` Chen-Yu Tsai
2018-10-31 18:36 ` [PATCH 3/7] arm64: allwinner: h6: Add OrangePi Lite2 initial support Jagan Teki
2018-10-31 18:36 ` [PATCH 4/7] arm64: allwinner: h6: Add MMC1 pinmux Jagan Teki
2018-10-31 18:36 ` [PATCH 6/7] arm64: allwinner: h6: Add RTC clock to phandle 32kHz external oscillator Jagan Teki
[not found] ` <20181031183634.29640-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01 2:57 ` Chen-Yu Tsai
2018-10-31 18:36 ` [RFC PATCH 7/7] arm64: allwinner: h6: orangepi-liet2: Enable AP6356S WiFi support Jagan Teki
[not found] ` <20181031183634.29640-7-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-11-01 7:35 ` Jagan Teki
[not found] ` <CAMty3ZCeZzXYy4XRwTeQjYfpB6KKjEVRWyhjoca9Os4foLYL4g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 7:58 ` Chen-Yu Tsai
[not found] ` <CAGb2v67xCnH20Hga2P2Ekk3vhhOWUSgtOmRVAte+HDuodjsjkw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 9:08 ` Jagan Teki
[not found] ` <CAMty3ZBNdg43nL-HviyHufwQtTbC4wv20JVYBBT8LDpWiV0wTQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-01 9:49 ` Chen-Yu Tsai
2018-11-05 8:41 ` [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031183634.29640-5-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=jagan@openedev.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).