* [PATCH] arm64: dts: msm8916: remove bogus argument to the cpu clock
@ 2018-11-03 0:57 Niklas Cassel
2018-11-03 5:29 ` Bjorn Andersson
0 siblings, 1 reply; 2+ messages in thread
From: Niklas Cassel @ 2018-11-03 0:57 UTC (permalink / raw)
To: Andy Gross, David Brown, Rob Herring, Mark Rutland
Cc: bjorn.andersson, Niklas Cassel, linux-arm-msm, linux-soc,
devicetree, linux-kernel
The apcs node has #clock-cells = <0>, which means that those who
references it should specify 0 arguments.
The apcs reference in the cpu node incorrectly specifies an argument,
remove this bogus argument.
Fixes: 65afdf458360 ("arm64: dts: qcom: msm8916: Add CPU frequency scaling support")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index d302d8d639a1..e4bfd47178b1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -111,7 +111,7 @@
next-level-cache = <&L2_0>;
enable-method = "psci";
cpu-idle-states = <&CPU_SPC>;
- clocks = <&apcs 0>;
+ clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
};
@@ -123,7 +123,7 @@
next-level-cache = <&L2_0>;
enable-method = "psci";
cpu-idle-states = <&CPU_SPC>;
- clocks = <&apcs 0>;
+ clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
};
@@ -135,7 +135,7 @@
next-level-cache = <&L2_0>;
enable-method = "psci";
cpu-idle-states = <&CPU_SPC>;
- clocks = <&apcs 0>;
+ clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
};
@@ -147,7 +147,7 @@
next-level-cache = <&L2_0>;
enable-method = "psci";
cpu-idle-states = <&CPU_SPC>;
- clocks = <&apcs 0>;
+ clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
};
--
2.19.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: msm8916: remove bogus argument to the cpu clock
2018-11-03 0:57 [PATCH] arm64: dts: msm8916: remove bogus argument to the cpu clock Niklas Cassel
@ 2018-11-03 5:29 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2018-11-03 5:29 UTC (permalink / raw)
To: Niklas Cassel
Cc: Andy Gross, David Brown, Rob Herring, Mark Rutland, linux-arm-msm,
linux-soc, devicetree, linux-kernel
On Fri 02 Nov 17:57 PDT 2018, Niklas Cassel wrote:
> The apcs node has #clock-cells = <0>, which means that those who
> references it should specify 0 arguments.
>
> The apcs reference in the cpu node incorrectly specifies an argument,
> remove this bogus argument.
>
> Fixes: 65afdf458360 ("arm64: dts: qcom: msm8916: Add CPU frequency scaling support")
> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index d302d8d639a1..e4bfd47178b1 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -111,7 +111,7 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> - clocks = <&apcs 0>;
> + clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> };
> @@ -123,7 +123,7 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> - clocks = <&apcs 0>;
> + clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> };
> @@ -135,7 +135,7 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> - clocks = <&apcs 0>;
> + clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> };
> @@ -147,7 +147,7 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> - clocks = <&apcs 0>;
> + clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> };
> --
> 2.19.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-11-03 5:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-11-03 0:57 [PATCH] arm64: dts: msm8916: remove bogus argument to the cpu clock Niklas Cassel
2018-11-03 5:29 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).