* [PATCH] arm64: dts: Add flexcan nodes in LX2160A
@ 2018-10-24 10:49 Pankaj Bansal
2018-11-04 8:34 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Pankaj Bansal @ 2018-10-24 10:49 UTC (permalink / raw)
To: linux-arm-kernel@lists.infradead.org, Shawn Guo, Leo Li,
Oliver Hartkopp, Marc Kleine-Budde, linux-can@vger.kernel.org
Cc: Mark Rutland, devicetree@vger.kernel.org, Pankaj Bansal,
Rob Herring
The FlexCAN module in LX2160A is a communication controller implementing
the CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B
protocol specifications.
-Flexible mailboxes configurable to store 0 to 8, 16, 32 or 64 bytes
data length
-Each mailbox configurable as receive or transmit, all supporting
standard and extended messages
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
This patch depends on below patches:
[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=369563
[2] https://patchwork.kernel.org/patch/10645287/
This patch is used by below patches:
[1] https://www.spinics.net/lists/linux-can/msg00348.html
.../boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++++
.../boot/dts/freescale/fsl-lx2160a-rdb.dts | 8 ++++++++
.../boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++
3 files changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 99a22abbe725..8a0305a2b778 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -31,6 +31,14 @@
};
};
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
&crypto {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 6481e5f20e69..f8c95fc6de27 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -31,6 +31,14 @@
};
};
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
&crypto {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 56f846c55812..23ea8776b55a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -566,6 +566,24 @@
status = "disabled";
};
+ can0: can@2180000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 7>, <&clockgen 4 7>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can@2190000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 7>, <&clockgen 4 7>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
uart0: serial@21c0000 {
compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21c0000 0x0 0x1000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: Add flexcan nodes in LX2160A
2018-10-24 10:49 [PATCH] arm64: dts: Add flexcan nodes in LX2160A Pankaj Bansal
@ 2018-11-04 8:34 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2018-11-04 8:34 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Mark Rutland, devicetree@vger.kernel.org, Oliver Hartkopp,
linux-can@vger.kernel.org, Rob Herring, Marc Kleine-Budde, Leo Li,
linux-arm-kernel@lists.infradead.org
On Wed, Oct 24, 2018 at 10:49:20AM +0000, Pankaj Bansal wrote:
> The FlexCAN module in LX2160A is a communication controller implementing
> the CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B
> protocol specifications.
>
> -Flexible mailboxes configurable to store 0 to 8, 16, 32 or 64 bytes
> data length
> -Each mailbox configurable as receive or transmit, all supporting
> standard and extended messages
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> This patch depends on below patches:
> [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=369563
> [2] https://patchwork.kernel.org/patch/10645287/
>
> This patch is used by below patches:
> [1] https://www.spinics.net/lists/linux-can/msg00348.html
>
> .../boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++++
> .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 8 ++++++++
> .../boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++
> 3 files changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22abbe725..8a0305a2b778 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -31,6 +31,14 @@
> };
> };
>
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> &crypto {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> index 6481e5f20e69..f8c95fc6de27 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -31,6 +31,14 @@
> };
> };
>
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> &crypto {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 56f846c55812..23ea8776b55a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -566,6 +566,24 @@
> status = "disabled";
> };
>
> + can0: can@2180000 {
> + compatible = "fsl,lx2160ar1-flexcan";
Is the compatible documented somewhere?
Shawn
> + reg = <0x0 0x2180000 0x0 0x10000>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>, <&clockgen 4 7>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + can1: can@2190000 {
> + compatible = "fsl,lx2160ar1-flexcan";
> + reg = <0x0 0x2190000 0x0 0x10000>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>, <&clockgen 4 7>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> uart0: serial@21c0000 {
> compatible = "arm,sbsa-uart","arm,pl011";
> reg = <0x0 0x21c0000 0x0 0x1000>;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-11-04 8:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-10-24 10:49 [PATCH] arm64: dts: Add flexcan nodes in LX2160A Pankaj Bansal
2018-11-04 8:34 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).