From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinod Koul Subject: [PATCH v2 11/17] arm64: dts: qcom: pms405: add gpios Date: Mon, 5 Nov 2018 21:15:23 +0530 Message-ID: <20181105154529.7614-12-vkoul@kernel.org> References: <20181105154529.7614-1-vkoul@kernel.org> Return-path: In-Reply-To: <20181105154529.7614-1-vkoul@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross , David Brown Cc: Rob Herring , Mark Rutland , linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vinod Koul List-Id: devicetree@vger.kernel.org Add the GPIOs present on PMS405 chip. Signed-off-by: Vinod Koul --- arch/arm64/boot/dts/qcom/pms405.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index cdb4547c998b..18410d9f0f8f 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -17,5 +17,21 @@ reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; + + pms405_gpios: gpios@c000 { + compatible = "qcom,pms405-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>; + }; }; }; -- 2.14.4