From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: Re: [PATCH v2 13/17] arm64: dts: qcom: qcs404: Add remoteproc nodes
Date: Mon, 5 Nov 2018 11:10:35 -0800
Message-ID: <20181105191035.GR2523@minitux>
References: <20181105154529.7614-1-vkoul@kernel.org>
 <20181105154529.7614-14-vkoul@kernel.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20181105154529.7614-14-vkoul@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On Mon 05 Nov 07:45 PST 2018, Vinod Koul wrote:

> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Add the TrustZone based remoteproc nodes and their glink edges for
> adsp, cdsp and wcss.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  arch/arm64/boot/dts/qcom/qcs404.dtsi | 87 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 8e207a25ddf0..b560ab6e49ff 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -373,4 +373,91 @@
>  			#interrupt-cells = <2>;
>  		};
>  	};
> +
> +	remoteproc-adsp {
> +		compatible = "qcom,qcs404-adsp-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&xo_board>;
> +		clock-names = "xo";
> +

As the TZ-backed remoteproc drivers will not be used on all variation of
products on this platform please add status = "disabled"; to these nodes
and enable them in the evb.

Regards,
Bjorn

> +		memory-region = <&adsp_fw_mem>;
> +
> +		qcom,smem-states = <&adsp_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
> +
> +			qcom,remote-pid = <2>;
> +			mboxes = <&apcs_glb 8>;
> +
> +			label = "adsp";
> +		};
> +	};
> +
> +	remoteproc-cdsp {
> +		compatible = "qcom,qcs404-cdsp-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&xo_board>;
> +		clock-names = "xo";
> +
> +		memory-region = <&cdsp_fw_mem>;
> +
> +		qcom,smem-states = <&cdsp_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
> +
> +			qcom,remote-pid = <5>;
> +			mboxes = <&apcs_glb 12>;
> +
> +			label = "cdsp";
> +		};
> +	};
> +
> +	remoteproc-wcss {
> +		compatible = "qcom,qcs404-wcss-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&xo_board>;
> +		clock-names = "xo";
> +
> +		memory-region = <&wlan_fw_mem>;
> +
> +		qcom,smem-states = <&wcss_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
> +
> +			qcom,remote-pid = <1>;
> +			mboxes = <&apcs_glb 16>;
> +
> +			label = "wcss";
> +		};
> +	};
>  };
> -- 
> 2.14.4
>