From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: Re: [PATCH v2 17/17] arm64: dts: qcom: pms405: Add pon and pwrkey
 nodes
Date: Mon, 5 Nov 2018 11:13:40 -0800
Message-ID: <20181105191340.GV2523@minitux>
References: <20181105154529.7614-1-vkoul@kernel.org>
 <20181105154529.7614-18-vkoul@kernel.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20181105154529.7614-18-vkoul@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On Mon 05 Nov 07:45 PST 2018, Vinod Koul wrote:

> PMS405 also features PON block, so add PON and PWRKEY nodes
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/pms405.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
> index 18410d9f0f8f..2c7cc1e94ff4 100644
> --- a/arch/arm64/boot/dts/qcom/pms405.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
> @@ -2,6 +2,7 @@
>  // Copyright (c) 2018, Linaro Limited
>  
>  #include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>  
>  &spmi_bus {
>  
> @@ -18,6 +19,21 @@
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
>  		};
>  
> +		pon@800 {
> +			compatible = "qcom,pms405-pon";
> +			reg = <0x800>;
> +			mode-bootloader = <0x2>;
> +			mode-recovery = <0x1>;
> +
> +			pwrkey {
> +				compatible = "qcom,pm8941-pwrkey";
> +				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				linux,code = <KEY_POWER>;
> +			};
> +		};
> +
>  		pms405_gpios: gpios@c000 {
>  			compatible = "qcom,pms405-gpio";
>  			reg = <0xc000>;
> -- 
> 2.14.4
>