From: Vasily Khoruzhick <anarsoul@gmail.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Vasily Khoruzhick <anarsoul@gmail.com>,
Mylene JOSSERAND <mylene.josserand@free-electrons.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
alsa-devel@alsa-project.org
Subject: [PATCH v7 2/4] arm64: dts: allwinner: a64: add nodes necessary for analog sound support
Date: Thu, 8 Nov 2018 20:24:20 -0800 [thread overview]
Message-ID: <20181109042422.25653-3-anarsoul@gmail.com> (raw)
In-Reply-To: <20181109042422.25653-1-anarsoul@gmail.com>
Add nodes for i2s, digital and analog parts of audiocodec on A64
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index f3a66f888205..5c52eb6148a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -173,6 +173,30 @@
compatible = "linux,spdif-dit";
};
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-a64-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,mclk-fs = <512>;
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC";
+ status = "disabled";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&dai>;
+ };
+
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@@ -665,6 +689,30 @@
status = "disabled";
};
+ dai: dai@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-a64-codec-i2s";
+ reg = <0x01c22c00 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_CODEC>;
+ reset-names = "rst";
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ codec: codec@1c22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x600>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -902,6 +950,12 @@
#reset-cells = <1>;
};
+ codec_analog: codec-analog@1f015c0 {
+ compatible = "allwinner,sun50i-a64-codec-analog";
+ reg = <0x01f015c0 0x4>;
+ status = "disabled";
+ };
+
r_i2c: i2c@1f02400 {
compatible = "allwinner,sun50i-a64-i2c",
"allwinner,sun6i-a31-i2c";
--
2.19.1
next prev parent reply other threads:[~2018-11-09 4:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 4:24 [PATCH v7 0/4] Add support for audiocodec in Allwinner A64 Vasily Khoruzhick
2018-11-09 4:24 ` [PATCH v7 1/4] ASoC: sun8i-codec: add missing route for ADC Vasily Khoruzhick
2018-11-13 23:10 ` Applied "ASoC: sun8i-codec: add missing route for ADC" to the asoc tree Mark Brown
2018-11-09 4:24 ` Vasily Khoruzhick [this message]
2018-11-09 4:24 ` [PATCH v7 3/4] arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine Vasily Khoruzhick
2018-11-09 4:24 ` [PATCH v7 4/4] arm64: dts: allwinner: a64: enable sound on Pinebook Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181109042422.25653-3-anarsoul@gmail.com \
--to=anarsoul@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=mylene.josserand@free-electrons.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).