* Re: [bug report] armada-8040-mcbin: 4.20-rc1 boot failure
[not found] <20181109121112.xibwnc354wzsbovl@bars>
2018-11-09 12:17 ` [bug report] armada-8040-mcbin: 4.20-rc1 boot failure Sergey Matyukevich
@ 2018-11-11 13:08 ` Baruch Siach
1 sibling, 0 replies; 2+ messages in thread
From: Baruch Siach @ 2018-11-11 13:08 UTC (permalink / raw)
To: Sergey Matyukevich, Gregory CLEMENT
Cc: linux-kernel, devicetree, linux-arm-kernel
Hi Sergey, Gregory,
Sergey Matyukevich writes:
> MacchiatoBin board fails to boot v4.20-rc1 kernel built using arm64
> defconfig. According to quick bisection of the board dts file, the
> root cause is in dts patch enabling CPU deep idle states:
> see 8ed46368776b3bc. Is there any pending fix other than reverting
> deep idle state support ?
I reproduced the same boot failure on the Armada 8K based Clearfog
GT-8K. Revert of commit 8ed46368776b3bc on top of v4.20-rc1 makes the
system boot again.
Here is the splat I get:
[ 87.358425] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 87.364556] rcu: 3-...!: (1 ticks this GP) idle=d04/0/0x0 softirq=79/79 fqs=1
[ 87.371897] rcu: (detected by 2, t=21490 jiffies, g=-1035, q=179)
[ 87.378106] Task dump for CPU 3:
[ 87.381347] swapper/3 R running task 0 0 1 0x00000028
[ 87.388428] Call trace:
[ 87.390892] __switch_to+0x78/0xb4
[ 87.394310] arm_enter_idle_state+0x38/0x4c
[ 87.398512] cpuidle_enter_state+0xc8/0x15c
[ 87.402713] cpuidle_enter+0x18/0x20
[ 87.406304] call_cpuidle+0x30/0x34
[ 87.409807] do_idle+0x19c/0x224
[ 87.413048] cpu_startup_entry+0x20/0x24
[ 87.416988] secondary_start_kernel+0x158/0x168
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 2+ messages in thread