From: Jonathan Cameron <jic23@kernel.org>
To: Heiko Stuebner <heiko@sntech.de>
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Heiko Stuebner <heiko.stuebner@bq.com>,
Denis Ciocca <denis.ciocca@st.com>
Subject: Re: [PATCH] iio: st-accel: add support for lis3de
Date: Sun, 11 Nov 2018 13:33:33 +0000 [thread overview]
Message-ID: <20181111133333.0d292c80@archlinux> (raw)
In-Reply-To: <20181107154521.32761-1-heiko@sntech.de>
On Wed, 7 Nov 2018 16:45:21 +0100
Heiko Stuebner <heiko@sntech.de> wrote:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
>
> This commit add support for STMicroelectronics lis3de accelerometer.
> Datasheet for this device can be found here:
>
> https://www.st.com/resource/en/datasheet/lis3de.pdf
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
> drivers/iio/accel/Kconfig | 2 +-
> drivers/iio/accel/st_accel.h | 1 +
> drivers/iio/accel/st_accel_core.c | 1 +
> drivers/iio/accel/st_accel_i2c.c | 5 +++++
> drivers/iio/accel/st_accel_spi.c | 5 +++++
> include/linux/iio/common/st_sensors.h | 2 +-
> 7 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
> index 6f626f73417e..01c986b84bd4 100644
> --- a/Documentation/devicetree/bindings/iio/st-sensors.txt
> +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
> @@ -48,6 +48,7 @@ Accelerometers:
> - st,lis3l02dq
> - st,lis2dw12
> - st,lis3dhh
> +- st,lis3de
>
> Gyroscopes:
> - st,l3g4200d-gyro
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 7993a67bd351..898839ca164a 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -223,7 +223,7 @@ config IIO_ST_ACCEL_3AXIS
> Say yes here to build support for STMicroelectronics accelerometers:
> LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
> LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
> - LNG2DM
> + LNG2DM, LIS3DE
>
> This driver can also be built as a module. If so, these modules
> will be created:
> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
> index 2f931e4837e5..fd53258656ca 100644
> --- a/drivers/iio/accel/st_accel.h
> +++ b/drivers/iio/accel/st_accel.h
> @@ -56,6 +56,7 @@ enum st_accel_type {
> #define LNG2DM_ACCEL_DEV_NAME "lng2dm"
> #define LIS2DW12_ACCEL_DEV_NAME "lis2dw12"
> #define LIS3DHH_ACCEL_DEV_NAME "lis3dhh"
> +#define LIS3DE_ACCEL_DEV_NAME "lis3de"
>
> /**
> * struct st_sensors_platform_data - default accel platform data
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 3e6fd5a8ac5b..f7b471121508 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -103,6 +103,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> [4] = LSM330DLC_ACCEL_DEV_NAME,
> [5] = LSM303AGR_ACCEL_DEV_NAME,
> [6] = LIS2DH12_ACCEL_DEV_NAME,
> + [7] = LIS3DE_ACCEL_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> index 2ca5d1f6ade0..de8ae4327094 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -98,6 +98,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,lis2dw12",
> .data = LIS2DW12_ACCEL_DEV_NAME,
> },
> + {
> + .compatible = "st,lis3de",
> + .data = LIS3DE_ACCEL_DEV_NAME,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -135,6 +139,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
> { LIS331DL_ACCEL_DEV_NAME },
> { LIS3LV02DL_ACCEL_DEV_NAME },
> { LIS2DW12_ACCEL_DEV_NAME },
> + { LIS3DE_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> index dcc9bd243a52..73bfb5d04e2b 100644
> --- a/drivers/iio/accel/st_accel_spi.c
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -90,6 +90,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,lis3dhh",
> .data = LIS3DHH_ACCEL_DEV_NAME,
> },
> + {
> + .compatible = "st,lis3de",
> + .data = LIS3DE_ACCEL_DEV_NAME,
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -143,6 +147,7 @@ static const struct spi_device_id st_accel_id_table[] = {
> { LIS3LV02DL_ACCEL_DEV_NAME },
> { LIS2DW12_ACCEL_DEV_NAME },
> { LIS3DHH_ACCEL_DEV_NAME },
> + { LIS3DE_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> index f9bd6e8ab138..8092b8e7f37e 100644
> --- a/include/linux/iio/common/st_sensors.h
> +++ b/include/linux/iio/common/st_sensors.h
> @@ -40,7 +40,7 @@
> #define ST_SENSORS_DEFAULT_STAT_ADDR 0x27
>
> #define ST_SENSORS_MAX_NAME 17
> -#define ST_SENSORS_MAX_4WAI 7
> +#define ST_SENSORS_MAX_4WAI 8
>
> #define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \
> ch2, s, endian, rbits, sbits, addr) \
next prev parent reply other threads:[~2018-11-11 13:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-07 15:45 [PATCH] iio: st-accel: add support for lis3de Heiko Stuebner
2018-11-11 13:33 ` Jonathan Cameron [this message]
2018-11-12 18:59 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181111133333.0d292c80@archlinux \
--to=jic23@kernel.org \
--cc=denis.ciocca@st.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko.stuebner@bq.com \
--cc=heiko@sntech.de \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).