Re: [PATCH v2 3/9] iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark

[Jonathan Cameron <jic23@kernel.org>]

On Sun, 11 Nov 2018 15:15:30 +0100
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> wrote:

> Remove static qualifier from st_lsm6dsx_set_watermark routine in
> order to be reused supporting st_lsm6dsx i2c controller
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Applied.  This one might have been taking the one thing one
patch rule a little far ;)

Does no real harm though.

Thanks,

Jonathan

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      | 1 +
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 2 +-
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index ec204d3b4b1f..ac4cbbb0b3fb 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -185,6 +185,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
>  int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor);
>  int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor);
>  int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw);
> +int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val);
>  int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
>  				u16 watermark);
>  int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw);
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 961ce9d65d82..d703fcd8706a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -600,7 +600,7 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
>  	return err;
>  }
>  
> -static int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
> +int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
>  {
>  	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
>  	struct st_lsm6dsx_hw *hw = sensor->hw;