From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 5/9] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
Date: Sun, 11 Nov 2018 16:31:03 +0000 [thread overview]
Message-ID: <20181111163103.4f2f6376@archlinux> (raw)
In-Reply-To: <faa1857c37967fe11502bde788b4d81d4c0b3ace.1541945612.git.lorenzo.bianconi@redhat.com>
On Sun, 11 Nov 2018 15:15:32 +0100
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> wrote:
> Add st_lsm6dsx_sensor_set_enable routine and remove
> st_lsm6dsx_sensor_{enable/disable} ones in order to make the code more
> readable and remove unnecessary functions
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 +--
> .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 12 ++-----
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 32 ++++++-------------
> 3 files changed, 15 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 4c8385d19c78..2beb4f563892 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -185,8 +185,8 @@ extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
>
> int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
> struct regmap *regmap);
> -int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor);
> -int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor);
> +int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> + bool enable);
> int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw);
> int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val);
> int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> index f4804008b585..6a379767b919 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> @@ -579,15 +579,9 @@ static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable)
> goto out;
> }
>
> - if (enable) {
> - err = st_lsm6dsx_sensor_enable(sensor);
> - if (err < 0)
> - goto out;
> - } else {
> - err = st_lsm6dsx_sensor_disable(sensor);
> - if (err < 0)
> - goto out;
> - }
> + err = st_lsm6dsx_sensor_set_enable(sensor, enable);
> + if (err < 0)
> + goto out;
>
> err = st_lsm6dsx_set_fifo_odr(sensor, enable);
> if (err < 0)
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 8885c9755456..28ddedbd1304 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -530,33 +530,21 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr)
> return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
> }
>
> -int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor)
> -{
> - int err;
> -
> - err = st_lsm6dsx_set_odr(sensor, sensor->odr);
> - if (err < 0)
> - return err;
> -
> - sensor->hw->enable_mask |= BIT(sensor->id);
> -
> - return 0;
> -}
> -
> -int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor)
> +int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> + bool enable)
> {
> struct st_lsm6dsx_hw *hw = sensor->hw;
> - const struct st_lsm6dsx_reg *reg;
> - unsigned int data;
> + u16 odr = enable ? sensor->odr : 0;
> int err;
>
> - reg = &st_lsm6dsx_odr_table[sensor->id].reg;
> - data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask);
> - err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
> + err = st_lsm6dsx_set_odr(sensor, odr);
> if (err < 0)
> return err;
>
> - sensor->hw->enable_mask &= ~BIT(sensor->id);
> + if (enable)
> + hw->enable_mask |= BIT(sensor->id);
> + else
> + hw->enable_mask &= ~BIT(sensor->id);
>
> return 0;
> }
> @@ -568,7 +556,7 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
> int err, delay;
> __le16 data;
>
> - err = st_lsm6dsx_sensor_enable(sensor);
> + err = st_lsm6dsx_sensor_set_enable(sensor, true);
> if (err < 0)
> return err;
>
> @@ -579,7 +567,7 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
> if (err < 0)
> return err;
>
> - st_lsm6dsx_sensor_disable(sensor);
> + st_lsm6dsx_sensor_set_enable(sensor, false);
>
> *val = (s16)le16_to_cpu(data);
>
next prev parent reply other threads:[~2018-11-12 2:20 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-11 14:15 [PATCH v2 0/9] add i2c controller support to st_lsm6dsx driver Lorenzo Bianconi
2018-11-11 14:15 ` [PATCH v2 1/9] iio: imu: st_lsm6dsx: introduce locked read/write utility routines Lorenzo Bianconi
2018-11-11 16:12 ` Jonathan Cameron
2018-11-11 14:15 ` [PATCH v2 2/9] iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap Lorenzo Bianconi
2018-11-11 16:13 ` Jonathan Cameron
2018-11-11 14:15 ` [PATCH v2 3/9] iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark Lorenzo Bianconi
2018-11-11 16:14 ` Jonathan Cameron
2018-11-11 14:15 ` [PATCH v2 4/9] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids Lorenzo Bianconi
2018-11-11 16:15 ` Jonathan Cameron
2018-11-11 14:15 ` [PATCH v2 5/9] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine Lorenzo Bianconi
2018-11-11 16:31 ` Jonathan Cameron [this message]
2018-11-11 14:15 ` [PATCH v2 6/9] iio: imu: st_lsm6dsx: add i2c embedded controller support Lorenzo Bianconi
2018-11-11 16:40 ` Jonathan Cameron
2018-11-11 14:15 ` [PATCH v2 7/9] iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine Lorenzo Bianconi
2018-11-11 16:43 ` Jonathan Cameron
2018-11-11 14:15 ` [PATCH v2 8/9] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller Lorenzo Bianconi
2018-11-11 16:43 ` Jonathan Cameron
2018-11-11 14:15 ` [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors Lorenzo Bianconi
2018-11-11 16:45 ` Jonathan Cameron
2018-11-17 15:37 ` Rob Herring
2018-11-17 16:26 ` Jonathan Cameron
2018-11-17 17:24 ` Lorenzo Bianconi
2018-11-21 18:57 ` Jonathan Cameron
2018-11-25 9:13 ` Lorenzo Bianconi
2018-11-11 16:46 ` [PATCH v2 0/9] add i2c controller support to st_lsm6dsx driver Jonathan Cameron
2018-11-11 17:35 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181111163103.4f2f6376@archlinux \
--to=jic23@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).