From mboxrd@z Thu Jan  1 00:00:00 1970
From: Craig Tatlor <ctatlor97@gmail.com>
Subject: Re: [PATCH V2] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2)
 support
Date: Mon, 12 Nov 2018 20:23:43 +0000
Message-ID: <20181112202343.GA31294@arch.home>
References: <20180812142317.19991-1-ctatlor97@gmail.com>
 <61693687.BtxviolxTZ@phil>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <61693687.BtxviolxTZ@phil>
Sender: linux-kernel-owner@vger.kernel.org
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-arm-msm@vger.kernel.org, Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On Mon, Nov 12, 2018 at 04:34:50PM +0100, Heiko Stuebner wrote:
> Hi Craig,
> 
> Am Sonntag, 12. August 2018, 16:23:12 CET schrieb Craig Tatlor:
> > Initial device tree support for Qualcomm SDM630 SoC and
> > Sony Pioneer (Xperia XA2).
> > 
> > SDM630 is based off of the SDM660 soc and all SDM660 specific drivers are
> > compatible with it. SDM660 is also based off of MSM8998 so it uses some
> > of its drivers aswell.
> > 
> > The device tree is based on the CAF 4.4 kernel tree.
> > 
> > The device can be booted into the initrd with a shell over UART.
> > 
> > Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
> 
> With I think core drivers like clk, pinctrl merged in 4.20, do you
> plan on respinning the devicetree support or in general continue
> working on sdm630/sdm660?
>
Yeah, i am just a little busy at the moment, i should probably be
sending of v3 in a few weeks.
> Or do you have some git tree available somewhere, were I can follow
> along? I do have interest in supporting a sdm630 phone of my own
> but still don't want to duplicate work :-)
My git tree is  https://gitlab.com/opendata26/linux the
mainline-submit-2 branch, i have sdhci, usb(via downstream backport just
so i can debug without opening phone) and also working on modem but that
isnt in that tree and isnt working quite yet.
> 
> 
> Thanks
> Heiko
> 
> 
>