From: Rob Herring <robh@kernel.org>
To: Taniya Das <tdas@codeaurora.org>
Cc: Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v9 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
Date: Mon, 12 Nov 2018 18:19:52 -0600 [thread overview]
Message-ID: <20181113001952.GA2556@bogus> (raw)
In-Reply-To: <1541814256-23254-2-git-send-email-tdas@codeaurora.org>
On Sat, Nov 10, 2018 at 07:14:15AM +0530, Taniya Das wrote:
> Add device tree bindings for Low Power Audio subsystem clock controller for
> Qualcomm Technology Inc's SDM845 SoCs.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> .../devicetree/bindings/clock/qcom,gcc.txt | 16 +++++++++++++
Seems like a separate change?
> .../devicetree/bindings/clock/qcom,lpasscc.txt | 26 ++++++++++++++++++++++
> include/dt-bindings/clock/qcom,gcc-sdm845.h | 2 ++
> include/dt-bindings/clock/qcom,lpass-sdm845.h | 16 +++++++++++++
> 4 files changed, 60 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
> create mode 100644 include/dt-bindings/clock/qcom,lpass-sdm845.h
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> index 52d9345..8661c3c 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
> @@ -35,6 +35,8 @@ be part of GCC and hence the TSENS properties can also be
> part of the GCC/clock-controller node.
> For more details on the TSENS properties please refer
> Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +- protected-clocks : Protected clock specifier list as per common clock
> + binding.
>
> Example:
> clock-controller@900000 {
> @@ -55,3 +57,17 @@ Example of GCC with TSENS properties:
> #reset-cells = <1>;
> #thermal-sensor-cells = <1>;
> };
> +
> +Example of GCC with protected-clocks properties:
> + clock-controller@100000 {
> + compatible = "qcom,gcc-sdm845";
> + reg = <0x100000 0x1f0000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + protected-clocks = <GCC_QSPI_CORE_CLK>,
> + <GCC_QSPI_CORE_CLK_SRC>,
> + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> + <GCC_LPASS_Q6_AXI_CLK>,
> + <GCC_LPASS_SWAY_CLK>;
> + };
> diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
> new file mode 100644
> index 0000000..b9e9787
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
> @@ -0,0 +1,26 @@
> +Qualcomm LPASS Clock Controller Binding
> +-----------------------------------------------
> +
> +Required properties :
> +- compatible : shall contain "qcom,sdm845-lpasscc"
> +- #clock-cells : from common clock binding, shall contain 1.
> +- reg : shall contain base register address and size,
> + in the order
> + Index-0 maps to LPASS_CC register region
> + Index-1 maps to LPASS_QDSP6SS register region
No input clocks?
> +
> +Optional properties :
> +- reg-names : register names of LPASS domain
> + "cc", "qdsp6ss".
> +
> +Example:
> +
> +The below node has to be defined in the cases where the LPASS peripheral loader
> +would bring the subsystem out of reset.
> +
> + lpasscc: clock-controller@17014000 {
> + compatible = "qcom,sdm845-lpasscc";
> + reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
> + reg-names = "cc", "qdsp6ss";
> + #clock-cells = <1>;
> + };
> diff --git a/include/dt-bindings/clock/qcom,gcc-sdm845.h b/include/dt-bindings/clock/qcom,gcc-sdm845.h
> index b8eae5a..968fa65 100644
> --- a/include/dt-bindings/clock/qcom,gcc-sdm845.h
> +++ b/include/dt-bindings/clock/qcom,gcc-sdm845.h
> @@ -197,6 +197,8 @@
> #define GCC_QSPI_CORE_CLK_SRC 187
> #define GCC_QSPI_CORE_CLK 188
> #define GCC_QSPI_CNOC_PERIPH_AHB_CLK 189
> +#define GCC_LPASS_Q6_AXI_CLK 190
> +#define GCC_LPASS_SWAY_CLK 191
>
> /* GCC Resets */
> #define GCC_MMSS_BCR 0
> diff --git a/include/dt-bindings/clock/qcom,lpass-sdm845.h b/include/dt-bindings/clock/qcom,lpass-sdm845.h
> new file mode 100644
> index 0000000..015968e
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,lpass-sdm845.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SDM_LPASS_SDM845_H
> +#define _DT_BINDINGS_CLK_SDM_LPASS_SDM845_H
> +
> +#define LPASS_AUDIO_WRAPPER_AON_CLK 0
> +#define LPASS_Q6SS_AHBM_AON_CLK 1
> +#define LPASS_Q6SS_AHBS_AON_CLK 2
> +#define LPASS_QDSP6SS_XO_CLK 3
> +#define LPASS_QDSP6SS_SLEEP_CLK 4
> +#define LPASS_QDSP6SS_CORE_CLK 5
> +
> +#endif
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
next prev parent reply other threads:[~2018-11-13 0:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-10 1:44 [PATCH v9 0/2] Add support for LPASS clock controller for SDM845 Taniya Das
2018-11-10 1:44 ` [PATCH v9 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings Taniya Das
2018-11-13 0:19 ` Rob Herring [this message]
2018-11-22 7:52 ` Taniya Das
2018-11-10 1:44 ` [PATCH v9 2/2] clk: qcom: Add lpass clock controller driver for SDM845 Taniya Das
2018-11-21 19:07 ` Stephen Boyd
2018-11-22 7:50 ` Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181113001952.GA2556@bogus \
--to=robh@kernel.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).