devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Kemnade <andreas@kemnade.info>
To: johan@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Discussions about the Letux Kernel <letux-kernel@openphoenux.org>
Cc: Andreas Kemnade <andreas@kemnade.info>
Subject: [PATCH 0/5] gnss: sirf: add support for w2sg0004 + lna
Date: Sun, 18 Nov 2018 22:57:56 +0100	[thread overview]
Message-ID: <20181118215801.12280-1-andreas@kemnade.info> (raw)

Here is another chapter of the story to get gta04 gnss power
management into the mainline kernel.
There is a w2sg0004 without wakeup line in there, so power state
can only be determined indirectly by looking at the serial data lines.
Then there as also an lna which needs to be powered for real gps
reception. That part needs probably more discussion, since it might
be an idea to have it more generalized since it has nothing todo
with the chip itself.
I marked the corresponding patches as RFC. The support for
the w2sg0004 without wakeup can imho go in without the lna first
because users of that chip without an additional lna power supply
can already benefit from it if we should do more discussion first.
I just kept them together so that the full picture can be seen.

Andreas Kemnade (5):
  gnss: sirf: write data to gnss only when the gnss device is open
  gnss: sirf: power on logic for devices without wakeup signal
  dt-bindings: gnss: add w2sg0004 compatible string
  gnss: sirf: add a separate supply for a lna
  dt-bindings: gnss: add lna-supply property

 .../devicetree/bindings/gnss/sirfstar.txt          |   2 +
 drivers/gnss/sirf.c                                | 126 +++++++++++++++------
 2 files changed, 96 insertions(+), 32 deletions(-)

-- 
2.11.0

             reply	other threads:[~2018-11-18 21:57 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-18 21:57 Andreas Kemnade [this message]
2018-11-18 21:57 ` [PATCH 1/5] gnss: sirf: write data to gnss only when the gnss device is open Andreas Kemnade
2018-12-05 14:47   ` Johan Hovold
2018-12-05 20:14     ` Andreas Kemnade
2018-11-18 21:57 ` [PATCH 2/5] gnss: sirf: power on logic for devices without wakeup signal Andreas Kemnade
2018-11-19  8:37   ` H. Nikolaus Schaller
2018-12-05 15:01   ` Johan Hovold
2018-12-05 22:15     ` Andreas Kemnade
2018-11-18 21:57 ` [PATCH 3/5] dt-bindings: gnss: add w2sg0004 compatible string Andreas Kemnade
2018-12-04 22:57   ` Rob Herring
2018-12-05 15:01   ` Johan Hovold
2018-11-18 21:58 ` [PATCH RFC 4/5] gnss: sirf: add a separate supply for a lna Andreas Kemnade
2018-11-19  8:41   ` [Letux-kernel] " H. Nikolaus Schaller
2018-11-27 18:03   ` Pavel Machek
2018-11-30  6:38     ` Andreas Kemnade
2018-11-30  8:43       ` Pavel Machek
2018-12-05 15:06   ` Johan Hovold
2018-11-18 21:58 ` [PATCH RFC 5/5] dt-bindings: gnss: add lna-supply property Andreas Kemnade
2018-12-04 22:59   ` Rob Herring
2018-12-05 15:09   ` Johan Hovold
2018-12-09 19:11     ` Andreas Kemnade
2018-11-19  8:22 ` [Letux-kernel] [PATCH 0/5] gnss: sirf: add support for w2sg0004 + lna H. Nikolaus Schaller
2018-11-19 18:44   ` Andreas Kemnade
2018-11-19 19:05     ` H. Nikolaus Schaller
2018-12-05 15:19     ` [Letux-kernel] " Johan Hovold
2018-12-05 16:01       ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181118215801.12280-1-andreas@kemnade.info \
    --to=andreas@kemnade.info \
    --cc=devicetree@vger.kernel.org \
    --cc=johan@kernel.org \
    --cc=letux-kernel@openphoenux.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).