From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: [PATCH v4 0/2] Add Synopsys High-Speed USB PHY driver for Qualcomm SoCs Date: Mon, 19 Nov 2018 19:08:10 +0800 Message-ID: <20181119110812.15825-1-shawn.guo@linaro.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Kishon Vijay Abraham I Cc: Rob Herring , Sriharsha Allenki , Anu Ramanathan , Bjorn Andersson , Vinod Koul , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Shawn Guo List-Id: devicetree@vger.kernel.org It's based on a downstream driver from Sriharsha Allenki that uses USB phy framework, and gets rewrote to adpot generic phy framework together with quite some cleanups. Changes for v4: - Kill device tree property 'qcom,init-seq' by moving the settings into phy driver as device match data. Changes for v3: - Use SoC specific compatible "qcom,qcs404-usb-hsphy". - Use OF graph instead of extcon bindings to model the link to USB connector. Changes for v2: - Add a pointer to phy/phy-bindings.txt for property #phy-cells. - Roll back voltage settings in case function qcom_snps_hsphy_config_regulators() fails in the middle. - Add a comment for init-seq tuple which consists of 3 numbers. - Sort include headers alphabetically. - Sort register definitions in order of offset. Shawn Guo (1): phy: qualcomm: Add Synopsys High-Speed USB PHY driver Sriharsha Allenki (1): dt-bindings: phy: Add Qualcomm Synopsys High-Speed USB PHY binding .../phy/qcom,snps-28nm-usb-hs-phy.txt | 87 +++ drivers/phy/qualcomm/Kconfig | 10 + drivers/phy/qualcomm/Makefile | 1 + .../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c | 535 ++++++++++++++++++ 4 files changed, 633 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-28nm-usb-hs-phy.txt create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c -- 2.18.0