From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: [PATCH v2 3/6] dt-bindings: ap806: document the thermal interrupt capabilities Date: Fri, 23 Nov 2018 17:17:27 +0100 Message-ID: <20181123161730.11289-4-miquel.raynal@bootlin.com> References: <20181123161730.11289-1-miquel.raynal@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20181123161730.11289-1-miquel.raynal@bootlin.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Gregory Clement , Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Zhang Rui , Eduardo Valentin , Daniel Lezcano Cc: Mark Rutland , devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Antoine Tenart , Catalin Marinas , Will Deacon , Russell King , Maxime Chevallier , Nadav Haklai , Marc Zyngier , David Sniatkiwicz , Rob Herring , Thomas Petazzoni , Miquel Raynal , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org The thermal IP can produce interrupts on overheat situation. Describe them. Signed-off-by: Miquel Raynal --- .../bindings/arm/marvell/ap806-system-controller.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt index 3fd21bb7cb37..35e8dd2edfd2 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt @@ -114,12 +114,18 @@ Documentation/devicetree/bindings/thermal/thermal.txt The thermal IP can probe the temperature all around the processor. It may feature several channels, each of them wired to one sensor. +It is possible to setup an overheat interrupt by giving at least one +critical point to any subnode of the thermal-zone node. + Required properties: - compatible: must be one of: * marvell,armada-ap806-thermal - reg: register range associated with the thermal functions. Optional properties: +- interrupt-parent/interrupts: overheat interrupt handle. Should point to + line 18 of the SEI irqchip. + See interrupt-controller/interrupts.txt - #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer to this IP and represents the channel ID. There is one sensor per channel. O refers to the thermal IP internal channel, while positive @@ -133,6 +139,8 @@ ap_syscon1: system-controller@6f8000 { ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; #thermal-sensor-cells = <1>; }; }; -- 2.19.1