From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: Re: [PATCH 00/15] rtc: sun6i: clock rework and pre-H6 SoC support Date: Wed, 28 Nov 2018 19:45:28 +0100 Message-ID: <20181128184528.GA22504@Red> References: <20181128093013.24442-1-wens@csie.org> Reply-To: clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <20181128093013.24442-1-wens-jdAy2FN1RRM@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Chen-Yu Tsai Cc: Maxime Ripard , Alexandre Belloni , Alessandro Zummo , Michael Turquette , Stephen Boyd , Rob Herring , Mark Rutland , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rtc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, Nov 28, 2018 at 05:29:57PM +0800, Chen-Yu Tsai wrote: > Hi everyone, > > This series was started as part of enabling Bluetooth on various > Allwinner SBCs. The bluetooth controller requires a precise 32.768 kHz > clock fed to it to correctly detect the frequency of its main oscillator. > This clock signal is provided by the RTC, either directly from a special > pin on the SoC, or some clock output function from the clock controllers. > I found that the clock-related properties of the RTC on later SoCs were > incorrect or missing. > > This series reworks the compatible strings and clock parts of the device > tree bindings for sun6i-rtc. Currently we assume most Allwinner SoCs use > the same sun6i-rtc variant, when in fact they do not. The differences > that matter with regards to clocks are a) the A31 does not have an extra > external output for the RTC 32K clock, while most of the others do; > b) the clock frequency of the internal RC oscillator is different on > some SoCs; c) on the H6 the RTC also handles the 24 MHz DCXO, which > feeds the system HOSC. The last difference, and by extension the H6, are > not covered in this series. > > Patch 1 cleans up the clock-related section of the RTC device tree > binding. This would make it easier to read and easier to add additional > clocks. > > Patch 2 adds compatible strings for all identified variants introduced > prior to the H6. > > Patch 3 deprecates the external clock output for the A31. The A31 does > not have this output, so it's introduction and usage was an error. > > Patch 4 adds a clock output for the RTC's internal oscillator to the > device tree binding. This feeds the PRCM in some SoCs. > > Patch 5 adds a default clock name for the LOSC to the RTC driver. > > Patch 6 adds support for different hardware variants to the RTC driver. > > Patch 7 adds support for all known pre-H6 variants. > > Patch 8 exposes the RTC's internal oscillator through the device tree. > > Patch 9 makes the R40's CCU use the LOSC from the RTC module, instead of > its own internal oscillator. > > Patch 10 through 15 adds an RTC node or fixes up the RTC device node > address ranges, clock properties, names of existing clocks, and adds > accuracy properties for the external fixed oscillators. > > The clock names require fixing because the sunxi clock driver implicitly > depends on the HOSC and LOSC being named "osc24M" and "osc32k". The > "fixes" to the clock hierarchy introduced in this series means the names > must also be shuffled around or the in kernel representation would be > incorrect. This has been the case since the sunxi-ng drivers were > introduced. There are plans to address this, but the code is still in its > early stages. > > Please have a look. > > Thanks > ChenYu > > Chen-Yu Tsai (15): > dt-bindings: rtc: sun6i-rtc: Rewrite clock outputs as a list > dt-bindings: rtc: sun6i-rtc: Add compatible strings for pre-H6 > variants > dt-bindings: rtc: sun6i-rtc: Deprecate external clock output for A31 > dt-bindings: rtc: sun6i-rtc: Export internal RC oscillator > rtc: sun6i: Add default clock name for LOSC > rtc: sun6i: Add support for different variants > rtc: sun6i: Add support for all known pre-H6 variants > rtc: sun6i: Expose internal oscillator through device tree > clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output > ARM: dts: sun8i: a23/a33: Fix up RTC device node > ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators > ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references > ARM: dts: sun8i: r40: Add clock accuracy for external oscillators > ARM: dts: sun8i: r40: Add RTC device node > arm64: dts: allwinner: a64: Fix up RTC device node and clock > references > > .../devicetree/bindings/rtc/sun6i-rtc.txt | 31 ++++- > arch/arm/boot/dts/sun8i-a23-a33.dtsi | 6 +- > arch/arm/boot/dts/sun8i-h3.dtsi | 4 + > arch/arm/boot/dts/sun8i-r40.dtsi | 18 ++- > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 28 ++--- > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 22 ++-- > arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 4 + > drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 11 ++ > drivers/rtc/rtc-sun6i.c | 117 ++++++++++++++++-- > 9 files changed, 188 insertions(+), 53 deletions(-) > > -- Hello Tested-by: Corentin Labbe Tested-on: sun8i-r40-bananapi-m2-ultra Tested-on: sun50i-h5-nanopi-neo-plus2 Regards