From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: [PATCH] ARM: dts: realview-pbx: Fix duplicate regulator nodes Date: Thu, 29 Nov 2018 19:05:47 -0600 Message-ID: <20181130010547.24757-1-robh@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Linus Walleij , arm@kernel.org Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org There's a bug in dtc in checking for duplicate node names when there's another section (e.g. "/ { };"). In this case, skeleton.dtsi provides another section. Upon removal of skeleton.dtsi, the dtb fails to build due to a duplicate node 'fixedregulator@0'. As both nodes were pretty much the same 3.3V fixed regulator, it hasn't really mattered. Fix this by renaming the nodes to something unique. In the process, drop the unit-address which shouldn't be present wtihout reg property. Cc: Linus Walleij Signed-off-by: Rob Herring --- arch/arm/boot/dts/arm-realview-pbx.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index a5676697ff3b..916a97734f84 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -44,7 +44,7 @@ }; /* The voltage to the MMC card is hardwired at 3.3V */ - vmmc: fixedregulator@0 { + vmmc: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -52,7 +52,7 @@ regulator-boot-on; }; - veth: fixedregulator@0 { + veth: regulator-veth { compatible = "regulator-fixed"; regulator-name = "veth"; regulator-min-microvolt = <3300000>; @@ -567,4 +567,3 @@ }; }; }; - -- 2.19.1