From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Subject: [PATCH 5/9] dt-bindings: input: touchscreen: goodix: Document vcc-supply property Date: Mon, 3 Dec 2018 15:45:43 +0530 Message-ID: <20181203101547.16835-5-jagan@amarulasolutions.com> References: <20181203101547.16835-1-jagan@amarulasolutions.com> Reply-To: jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <20181203101547.16835-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Maxime Ripard , Rob Herring , Chen-Yu Tsai , Dmitry Torokhov , linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Lee Jones , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Cc: Jagan Teki List-Id: devicetree@vger.kernel.org vcc-supply property is need for some Goodix CTP controller like GT5663 where 3.3V external pull-up regulator connected via controller VCC pin. So, document the same as optional property. Signed-off-by: Jagan Teki --- Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index f7e95c52f3c7..604766e347ce 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -23,6 +23,7 @@ Optional properties: - touchscreen-inverted-y : Y axis is inverted (boolean) - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) (swapping is done after inverting the axis) + - vcc-supply : 3v3 regulator phandle for controller VCC pin Example: -- 2.18.0.321.gffc6fa0e3